Componeer™ Direct Composite Veneers Innovative and amazingly easy restoration of anterior teeth
COMPONEER
™
The New Direct Composite Veneering System. For innovative and amazingly easy restoration of anterior teeth COMPONEER are poylmerised, prefabricated nano-hybridcomposite enamel shells that combine the advantages of direct composite restoration with the advantages of prefabricated veneers. This is the first perfected system to allow amazingly easy restoration of anterior teeth with customised composite shells.
2
Advantages for the dentist: The pre-shaped COMPONEER veneers are available in different sizes and are easy to use for single-tooth reconstruction as well as complete reconstruction in the anterior region. Timeconsuming forming of the anatomical shape and surface and elaborate trimming are no longer required. COMPONEER can be customised to individual requirements with composite at any time.
• easy and efficient to use • only one session required • quality dental restorations with excellent aesthetic results • no impressions or laboratory necessary • optimum customisation (choice of colour, highlighting shape and structure) • economical for dentists and patients
Set off with a smile With COMPONEER, quality aesthetic restoration of anterior teeth can be performed efficiently in just a single session. Until now the dentist could only choose between a directly modelled composite restoration or elaborate indirect veneer technology. The Direct Composite Veneer System adds a new and interesting dimension to existing treatment options and gives dentists and patients new economic perspectives. Patients can be given a naturally aesthetic smile in just a single session, and set off smiling – with a “smile to go”.
due to high success rate and efficiency • high added value: the solution for many patients with reasonable investment for the dentist
Good reasons for the patient: • Beautiful teeth after one appointment • minimally invasive removal of healthy tooth substance • reduced treatment stress • customised solution • high surface and edge quality • more economical than indirect solutions
3
COMPONEER - Technical data: Bending modulus Bending strength Water absorption Water solubility X-ray opacity Vickers hardness Compression strength Smallest particle size ø particle size of filler Filler content by weight Filler content by volume Density
9000 MPa 127 MPa 16 µg/mm3 0.9 µg/mm3 2 mm Al 73 kg/mm2 392 MPa 20 nm 0.6 µm 80 % 65 % 2.0 g/mm3
(Reference: internal measurements)
Novel inner surface with micro-retentive structure for a permanent bond (24 MPa, see study "One Coat Bond" page 7).
4
From 0.3 mm veneer thickness. This allows a minimally invasive preparation.
Such perfection, even our development team had to smile with pride. An easy-to-use product. A fantastic solution. A perfected system. COMPONEER, Direct Composite Veneers, are a completely new class of veneers. They are manufactured industrially from highly filled nano-hybrid-composite which ensures excellent homogeneity and stability of the enamel shells. The extremely thin veneer coatings from 0.3 mm allow a high level of con-servation of hard tooth substance during preparation. The shiny and naturally designed surface adds a look of vitality to the restoration.
13
12
11
21
22
23
43
42
41
The novel micro-retentive inner surface increases wettability and ensures a lasting bond. Special conditioning of the veneer is not necessary. All this makes COMPONEER a milestone in veneer technology. A well-thought-out range of instruments, as well as comprehensive information material for dentists and patients, round off the product line. This quickly gives the user the information required to perform attractive, natural restorations effectively and economically.
31
32
33
Maxilla (MX) small
Mandibula (MD) small
Maxilla (MX) medium
Mandibula (MD) medium
Maxilla (MX) large
MD 43 42 41 31 32 33 mm Height x Width Height x Width Height x Width Height x Width Height x Width Height x Width S 9,6 x 6,5 9,2 x 5,5 9,2 x 5,5 9,2 x 5,5 9,2 x 5,3 9,6 x 6,5 M 10,6 x 7,3 10,2 x 5,9 10,2 x 6,1 10,2 x 6,1 10,2 x 5,9 10,6 x 7,3
MX 13 12 11 21 22 23 mm Height x Width Height x Width Height x Width Height x Width Height x Width Height x Width S 8,7 x 6,6 8,0 x 6,3 8,9 x 7,4 8,9 x 7,4 8,0 x 6,3 8,7 x 6,6 M 9,6 x 7,3 8,9 x 7,0 9,9 x 8,2 9,9 x 8,2 8,9 x 7,0 9,6 x 7,3 L 10,6 x 8,0 9,7 x 7,7 10,9 x 9,1 10,9 x 9,1 9,7 x 7,7 10,6 x 8,0
5
SYNERGY D6 and SYNERGY D6 Flow The universal nano composite is perfectly colourmatched to COMPONEER. The easy choice of shades, excellent modelling properties and high resistance to dental operating lights make this composite ideal for bonding veneers. Synergy D6 Flow with its excellent flow properties, is available for contouring and adding that final touch.
One Coat Bond This Total Etch Bond is a light-curing mono-component bonding agent. As COMPONEER is primarily bonded to enamel this is the ideal choice in adhesives. The bond is simply applied to the brush or COMPONEER via the syringe. Only one application layer is required due to the excellent wettability. Strong, permanent bonding forms the basis for invisible edges and long-life perfect aesthetics.
ComponeerTM Holder The holder is a pair of specially designed holding tweezers which considerably simplify shape corrections to 足COMPONEER as well as the application of the bond. The interchangeable holder caps (black protective caps) protect the COMPONEER.
ComponeerTM Placer An instrument made by practising experts for expert practice: the placer is used to align and position the veneers correctly and without slipping.
ComponeerTM Modelling Instrument MB5 The straight end of this instrument is exceptional in design and allows free rotation during treatment. The spatula end is extremely thin and sharp for cutting away excess composite.
ComponeerTM Contour Guide The unique bluish transparent contour guides permit precise contour conformity and, thus, selection of the right tooth shape. A total of 30 different shapes are available: 6 per size.
6
Three reasons to smile. Triple reliability. Synergy D6
One Coat Bond
Optimised abrasion resistance The abrasion resistance of Synergy D6 is comparable to that of natural enamel and protects the opposing cusps.
Strong bonding values One Coat Bond only requires a single application step for perfect adhesion. COMPONEER in combination with One Coat Bond demonstrates excellent adhesion, on composite, enamel and dentin. This ensures reliable and long-lasting adhesion of the restoration. The adhesive strength of COMPONEER is considerably greater than that for ceramic veneers due to the special micro-retentive surface.
µm
120
Antagonist natural enamel Restoration SYNERGY D6 Natural enamel
90 60 30
30 Adhesive strength / MPa
150
0
25 20 15 0
Total wear after 1,200,000 cycles (equates to 5 years in vivo)
COMPONEER
Ceramic veneer
(Reference: measurements at the universities of Geneva/Zurich)
ONE COAT BOND on enamel (Reference: data on file)
COMPONEER
100 no edge discoloration – 92.5 % minimal edge discoloration – 7.5 % penetration up to 0.5 mm deep – 0 % penetration up to 1.0 mm deep – 0 % penetration > 1.0 mm deep – 0 %
75 [%]
Testing edge seal by observing dye penetration The tightness of the edge seal after alternating mechanical and thermal load is outstanding. 92.5 % of all samples showed no dye penetration; 7.5 % showed only minimal discoloration on the edges. In other words, 100 % of the samples exhibited no or only minimal edge discoloration – a highly positive outcome. The adhesive retention also proved to be stress-resistant. No retention losses were seen.
ONE COAT BOND on dentine
50 25 0 no discoloration
minimal discoloration
penetration up penetration up to 0.5 mm to 1.0 mm
penetration > 1.0 mm
(Source: Study conducted by the University of Geneva)
7
A smile for virtually all occasions. Whether for incisor extensions, the covering of massive discolouration or the closing of diastemas, aesthetic corrections can be carried out easily and fast with COMPONEER. This closes the gap between time-consuming freehand and expensive invasive veneer techniques. Fractures, malposition or anatomical malformation can, of course, also be elegantly and permanently restored using the Direct Composite Veneer system. Especially in extensive reconstruction, the contralateral teeth can be efficiently set to symmetrical positions.
Clinical Indications Treatment of caries 1. Extensive cervical and interdental caries, discolouration of enamel, and slight malposition 2. Caries treated and homogenised anterior with Componeer
Optimisation of old restorations 1. Extensive old and insufficient restorations 2. Reconstructed function with Componeer
Attrition, abrasion, erosion 1. Edge-to-edge occlusion with abraded and broken anterior teeth with old restoration 2. Functional and aesthetic teeth with normal overjet constructed with Componeer
Tooth fracture 1. Loss of 1/3 of anterior tooth by fracture 2. Simplified shaping and construction with Componeer
8
Aesthetic / cosmetic Indications Extending incisors 1. Slightly shortened incisal edge with moderate malposition 2. The tooth proportions are reconstructed and aligned with Componeer
Malposition 1. Extensive malposition with crowding 2. A xially aligned correction and repositioning with Componeer
Cosmetic correction 1. Intrinsic, non-bleachable yellow discolouration and slightly too short teeth 2. Brightened teeth with Componeer
Discolouration 1. Extensive discolouration of enamel and dentine, cervical lesions 2. Restored function and aesthetics with Componeer
Anatomical malformation 1. Unevenly shaped teeth, conical tooth, diastema and malposition 2. Alignment of teeth, also to lip, with Componeer
Diastema 1. Diastema and anterior teeth too long 2. Gap closure and realignment with Componeer
9
COMPONEER
™
So easy to use it makes you smile. Benefits for patients & dentists Whether for an individual tooth or total reconstruction, COMPONEER is an easy-to-use and safe concept covering a wide variety of indications. Patients benefit from permanent direct restoration treatment and dentists have new efficient treatment options.
Clinical case studies
10
1. Old composite veneers with insufficient edges
2. Removal of old composite and etching of teeth
1. 11 with enamel fractures, demineralisation and old composite treatment
2. Minimally invasive preparation
3. Teeth aligned with ÂComponeer to contours of upper and lower lip
4. Individualised characteristics in spite of contralateral symmetry of Componeer
3. Optimal brightness in spite of marked surface structure
4. Optimal marginal adaptation at smallest layer thickness
Properties in clinical use Componeer is a complete well-thought-out system. All auxiliary tools have been specially developed and matched to ensure easy and safe use.
1. Initial situation: discoloured teeth, extensive caries, malposition, incorrect axial alignment
2. Select enamel and dentine shade with shade guide prior to isolation, ideally under daylight lamp
3. The perfectly matching Componeer is selected using the bluish transparent Contour Guides
4. Rubberdam adhesion technique facilitates functional working
5. Prior to opening the sealed Componeer, the shape is verified again following preparation
6. Careful grinding of the Componeer to give an exact fit
7. The composite is distributed on the tooth using the MB5 modelling instrument. The placer is used for stress-free application of the Componeer to its final position.
8. Final check for perfect edges before removing the rubberdam
9. Situation after two weeks
11
1300
1304
1308
SYSTEM KITS
Tips
Syringes
COMPONEERTM PREMIUM System Kit 84 COMPONEERTM: each upper Set: 11, 12, 13, 21, 22, 23 each lower Set: 31, 32, 33, 41, 42, 43 1 COMPONEERTM Set upper S - Enamel Universal 2 COMPONEERTM Set upper M - Enamel Universal 2 COMPONEERTM Set upper L - Enamel Universal 1 COMPONEERTM Set upper S - Enamel White Opalescent 2 COMPONEERTM Set upper M - Enamel White Opalescent 2 COMPONEERTM Set upper L - Enamel White Opalescent 1 COMPONEERTM Set lower S - Enamel Universal 1 COMPONEERTM Set lower M - Enamel Universal 1 COMPONEERTM Set lower S - Enamel White Opalescent 1 COMPONEERTM Set lower M - Enamel White Opalescent 1 COMPONEERTM Accessory Set / Material (see 1308 / 1309) 1 COMPONEERTM Accessory Set / Instruments (see 1310)
1300
1301
COMPONEERTM PREMIUM Set Kit 84 COMPONEERTM (see PREMIUM System Kit) COMPONEERTM Accessory Set / Material
1302
1303
COMPONEERTM BASIC System-Kit 36 COMPONEERTM: each upper Set: 11, 12, 13, 21, 22, 23 each lower Set: 31, 32, 33, 41, 42, 43 1 COMPONEERTM Set upper M - Enamel Universal 1 COMPONEERTM Set upper L - Enamel Universal 1 COMPONEERTM Set upper M - Enamel White Opalescent 1 COMPONEERTM Set upper L - Enamel White Opalescent 1 COMPONEERTM Set lower M - Enamel Universal 1 COMPONEERTM Set lower M - Enamel White Opalescent 1 COMPONEERTM Accessory Set / Material (see 1308 / 1309) 1 COMPONEERTM Accessory Set / Instruments (see 1310)
1304
1305
COMPONEERTM BASIC Set Kit 36 COMPONEERTM (see PREMIUM System Kit) COMPONEERTM Accessory Set / Material (see 1308 / 1309)
1306
1307
COMPONEERTM Accessory Set / Material COMPONEERTM Contour Guide, 1 each size (upper S, M, L, lower S, M) One Coat Bond (1 x 1.2 ml), Etchant Gel S (1 x 2.5 ml), SYNERGY D6 Dentin A1/B1, A2/B2; SYNERGY D6 Enamel White Opalescent, Enamel Universal (each colour: 10 x 0.25 g Tips; 1 x 4 g Syringe) 1 Shade Guide Componeer-Synergy D6, Synergy D6 Flow; 15 Bent Appl. Needles "Flow"
1308
1309
COMPONEERTM Accessory Set / Instruments 1 MB5 Modelling Instrument; 1 Holder and 10 Holder Caps; 1 Placer, 2 Placer Adapters, 10 Placer Stamps; Brushholder black and 1 pack brushes x 50 pcs; Comprepol Plus Cup and Point, Composhine Plus Cup and Point (1 pc. each); SwissFlex Trial Kit (1 Mandrel, 11 Discs) 1310
12
1310
Enamel White Opalescent
Enamel Universal
1311
1316
11
1321
1351
12
1322
1352
13
1323
1353
21
1324
1354
22
1325
1355
23
1326
1356
1312
1317
11
1327
1357
12
1328
1358
13
1329
1359
21
1330
1360
22
1331
1361
23
1332
1362
1313
1318
11
1333
1363
12
1334
1364
13
1335
1365
21
1336
1366
22
1337
1367
23
1338
1368
1314
1319
31
1339
1369
32
1340
1370
33
1341
1371
41
1342
1372
42
1343
1373
43
1344
1374
1315
1320
31
1345
1375
32
1346
1376
33
1347
1377
41
1348
1378
42
1349
1379
43
1350
1380
COMPONEERTM SETS AND REFILLS COMPONEERTM Set upper S, 6 Veneers: 11, 12, 13, 21, 22, 23 COMPONEERTM Refill upper S, 2 Veneers
COMPONEERTM Set upper M, 6 Veneers: 11, 12, 13, 21, 22, 23 COMPONEERTM Refill upper M, 2 Veneers
COMPONEERTM Set upper L, 6 Veneers: 11, 12, 13, 21, 22, 23 COMPONEERTM Refill upper L, 2 Veneers
COMPONEERTM Set lower S, 6 Veneers: 31, 32, 33, 41, 42, 43 COMPONEERTM Refill lower S, 2 Veneers
COMPONEER Set lower M, 6 Veneers: 31, 32, 33, 41, 42, 43 TM
COMPONEERTM Refill lower M, 2 Veneers
13
Composites and Bondings One Coat Bond, 1.2 ml
7879
Etchant Gel S, 2.5 ml
7373 Tips
Syringes
(each tip contains 0.25 g; 10 tips/pack)
(each syringe contains 4.0 g; 1 syringe/pack)
Dentin White Bleach
8375
8365
Dentin A1/B1
8376
8366
Dentin A2/B2
8377
8367
Dentin A3/D3
8378
8368
Dentin A3.5/B3
8379
8369
Dentin C2/C3
8380
8370
Dentin A4/C4
8383
8384
Enamel White Opalescent
8382
8371
Enamel Universal
8381
8372
Synergy D6
Synergy D6 Flow (1 Syringe/pack, 2.3 g each) A1/B1
7651
A2/B2
7652
A3/D3
7653
A3.5/B3
7654
A4/C4
7655
White Bleach
7656
Enamel Universal
7657 8469
Synergy D6 Flow Needles, 1 pack/20 pcs.
6001 1113
Shade Guide COMPONEER -Synergy D6, 1 pc. TM
6671
Dispenser for Composite Tips, 1 pc. Instruments/ACCESSORIES
6001 1110
6001 1105
MB5 Modelling Instrument, 1 pc.
6001 1110
Holder, 1 pc.
6001 1105
Holder Cap, 40 pcs.
6001 1106
Placer, 1 pc.
6001 1107
Placer Adapter, 5 pcs.
6001 1108
Placer Stamp, 50 pcs.
6001 1109
Brushholder black, 1 pc.
6001 1111
Brushes, 1 pack: 50 pcs.
6001 1112
COMPONEERTM Contour Guide 5 Sizes, 1 each size 6001 1107
7000
upper medium
7001
upper large
7002
lower small
7003
lower medium
7004
Comprepol Plus, Cup, 5 pcs.
2311RA
Composhine Plus, Cup, 5 pcs.
2411RA
Comprepol Plus, Point, 5 pcs.
2303RA
Composhine Plus, Point, 5 pcs.
2403RA
SwissFlex Trial Kit
14
upper small
250 098AA
All you need for a successful start. The COMPONEER Box A smile for immediate ordering
COMPONEER Direct Composite Veneers
Everything you need for applying COMPONEER is included in the compact ComponeerTM System Kit.
Contour Guide One Coat Bond Synergy D6 (tips or syringe) in the shades dentin A1/B1 and dentin A2/B2 as well as enamel W/O and enamel universal Synergy D6 Flow with application needles Various polishers Accessories ComponeerTM Holder ComponeerTM Placer MB5 Modelling Instrument
TM
TM
COMPONEER Promotional Items TM
Patient brochure Poster DVD and CD
15
Dr Mario Besek “The new COMPONEER Veneer System for the restoration of anterior teeth extends treatment options by combining the advantages of minimally invasive composite restoration and laboratory-made veneer technology. The advanced system offers patients and dentists new economical perspectives, all in just a single session.”
Make your patients smile. With COMPONEER by Coltène/Whaledent. TM
If you require further information or wish to place an order, our sales team is always at your service. Simply visit us at: www.componeer.info
9241 EN 02-11
Coltène/Whaledent Ltd. The President Suite A Kendal House, Burgess Hill Victoria Way West Sussex, RH15 9NF/U.K. Tel. + 44 1444 235486 Fax + 44 1444 870640 info@coltenewhaledent.co.uk Coltène/Whaledent AG Feldwiesenstr. 20 9450 Altstätten/Switzerland Tel. + 41 71 757 53 00 Fax + 41 71 757 53 01 info@coltenewhaledent.ch
Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, Ohio 44223/USA Tel. + 1 330 916 8800 Fax + 1 330 916 7077 info@coltenewhaledent.com