Zusammenfassung
Luftbeaufschlagte Turboverdichter und gasbeaufschlagte Turbinen stellen dynamisch arbeitende Fluidenergiemaschinen dar, bei denen im Wesentlichen durch die Änderung von Strömungsgeschwindigkeiten die Energie umgesetzt wird. Mit diesem Arbeitsprinzip bewirken sie eine Änderung des Druckniveaus im Fluid. Bei Energiezufuhr im Verdichter wird der statische Druck erhöht, bei Energieabgabe in der Turbine wird der statische Druck abgesenkt. Beide Maschinen Verdichter und Turbinen haben also geometrische und kinematische Gemeinsamkeiten (Abb 4.1-1 und 4.1-2).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Klassiker K, Fachbücher, Berichte und Skripten B
Adamczyk, J.J., Celestina, M.L., Greitzer, E.M.: The role of tip clearance in high-speed fan stall. ASME J. Turbomach. 113, 28–39 (1993)
AGARD: Aerodynamics of Power Plant Installation. North Atlantic Treaty Org. AGARD-XP-301 (1981)
Anderson, J.D. Jr.: Modern Compressible Flow, 2 Aufl. McGraw Hill, New York (1990)
Anderson, J.D. Jr.: Fundamentals of Aerodynamics, 2. Aufl. McGraw Hill, New York (1991)
Aurahs, L., Kasper, C., Kürner, M., Rose, M., Staudacher, S., Gier, J.: Water flow model turbine flow visualization study of the unsteady interaction of secondary flow vortices with the downstream rotor Journal of Power and Energie. In: Proceedings Mechanical Engineers, Bd. 223, Part A (2009)
Aurahs, L., Rose, M., Staudacher, S.: Experimental Investigation of Unsteady Interaction of Secondary Flows in a Turbine Stage, DLRK2009-1158, Aachen (2009)
Balje, O.E.: A study on Reynolds number effects in turbomachines. J. Eng. Power (1964)
Bammert, K., Kläukens, H., Hartmann, D.: Der Einfluss des radialen Schaufelspalts auf den Wirkungsgrad mehrstufiger Turbinen. VDI-Z 110(10) (1968)
Bauer, M.: Modulares Leistungsberechnungsverfahren zur automatisierten modellbasierten Leistungsanalyse von Gasturbinen. Dissertation, Universität Stuttgart (2005)
Baumann, J., Ries, T., Rose, M.G., Staudacher, S., Raab, I.: Actuated Transition in LP Turbine Laminar Separation – An Experimental Approach. DLRK2009-121277, Deutscher Luft- und Raumfahrtkongress. Aachen (2009)
Bauerfeind, K.: Steuerung und Regelung der Turboflugtriebwerke. Birkhäuser, Basel (1999)
Becker, B., Reyer, M., Swoboda, M.: Steady and unsteady numerical investigation of transitional shock-boundary-layer-interaction on a fan blade. Aerosp. Sci. Technol. 11, 507–517 (2007)
Bell, R.M.: Untersuchungen zur Stoß-Grenzschicht-Interferenz an aerodynamisch hochbelasteten Transsonik-Verdichtergittern. Dissertation, Universität der Bundeswehr (1995)
Benra, F.K.: Beitrag zur Berechnung der Strömung in mehrstufigen Axialverdichtern unter besonderer Berücksichtigung der Seitenwandgrenzschichten und der Sekundärströmungen, Dissertation, Universität Duisburg (1986)
Bergner, J., Hennecke, D.K.: Entwicklung von Verdichterrotoren für eienen einstufigen, transsonischen Axialverdichterprüfstand. DGLR-Kongress (2004)
Bergner, J.: Experimentelle Untersuchung der Strömung im Blattspitzenbereich eines transsonischen Axialverdichters nahe der Stabilitätsgrenze. Dissertation, Technische Universität Darmstadt (2005)
Biagosch, A.: Verfahren zur Optimierung der aerothermodynamischen Auslegung mehrstufiger Axialverdichter. Dissertation, Technische Universität München (1984)
Blaha, C.: Transsonischer Axialverdichter mit gepfeilten Profilen. Dissertation, Technische Universität Darmstadt (2000)
Blaha, C., Kablitz, S., Hennecke, D.K., Schmidt-Eisenlohr, U., Pirker, K., Haselho, S.: Numerical investigation of the flow in an aft-swept transonic compressor rotor". In: Proceedings of the ASME TURBOEXPO 2000. ASME, Munich (2000)
Bock, S., Horn, W., Wilfert, G., Sieber, J.: Active Core Technology Within the NEWAC Research Program for Cleaner and More Efficient Aero Engines. CEAS Paper CEAS-2007-055 (2007)
Bohl, W., Elmendorf, W.: Strömungsmaschinen 1. Aufl. Vogel Buchverlag (2004)
Boll, Ch., Spieler, S., Staudacher, S., Gebser, D.: Supply chain simulation and economical evaluation of forged Titanium discs for aircraft engines, GT2005-68310. Reno-Tahoe (2005)
Bölcs, A., Suter, P.: Transsonische Turbomaschinen, Wissenschaft und Technik: Taschenausgabe. Verlag G. Braun, Karlsruhe (1986)
Bräunling, W.J.G.: Flugzeugtriebwerke, 3. Aufl. Springer, Berlin (2009)
Bräunling, W.: Berechnung des Abströmwinkels aus rotierenden Turbinen Ringgittern auf konischen Stromflächen im Machzahlbereich sub bis supersonisch, Thermische Strömungsmaschinen 85. VDI Berichte 572.1. Düsseldorf (1985)
Bräunling, W., Quast, A., Dietrichs, H.J.: Detection of separation bubbles by infrared images in transonic turbine cascades. Trans. of the ASME. J. Turbomach. 110, 504–511 (1988)
Braig, W., Riegler, C.: Berücksichtigung des Einflusses des Isentropenexponenten auf die Kennfelder von Turbinen. Forschung im Ingenieurwesen (1994)
Bretschneider, S., Staudacher, S.: A feature based design approach to high pressure compressor peliminary design for civil aircraft propulsion systems. In: 1st DGLR-CEAS Conference 2007, DGLR-CEAS 2007-217, Berlin (2007)
Bretschneider, S., Rothe, F., Rose, M., Staudacher, S.: Compressor casing preliminary design based on features. GT2008-50102, ASME Turbo Expo 2008, Power for Land, Sea and Air, Berlin (2008)
Breuer, M.: Numerische Lösung des Navier-Stokes Gleichungen für dreidimensionale inkompressible instationäre Strömungen zur Simulation des Wirbelaufplatzens. Dissertation, RWTH Aachen (1991)
Breuer, T., Servaty, S.: Stall inception and surge in high speed axial flow compressors, AGARD propulsion and energetics panel (PEP). In: Symposium on Loss Mechanisms and Unsteady Flows in Turbomachines, Derby, UK, Paper 26 (1995)
Brignole, G., Danner, F., Kau, H.-P.: Time Resolved Simulation and Experimental Validation of the Flow in Axial Slot Casing Treatments for Transonic Axial Compressors. ASME GT2008-50593 (2008)
Brignole, G.: Parameter zur Auslegung effizienter Gehäusestrukturierungen. Dissertation, TU München (2010)
Broichhausen, K.D., Ziegler, K.U.: Supersonic and Transonic Compressors: Past, Status and Technology Trends. ASME Paper GT2005-69067 (2005)
Castner, R., Chiapetta, S., Wyzykowski, J., Adamczyk, J.J.: An Engine Research Program Focused on Low Pressure Turbine Aerodynamic Performance. ASME Turbo Expo GT-2002-30004 (2002)
Casey, M.V.: The effects of Reynolds number on the efficiency of centrifugal compressor stages. J. Eng. Gas Turbines Power 107, 541–548 (1985)
Casey, M.V., Marty, E.: Centrifugal compressors performance at design and off design. Institute of refrigeration at the institute of marine engineers, London (1986)
Conrad, J.: Strömung im Axialverdichter mit 50 % Reaktion, Mot Z (MTZ) (1958)
Cordes, G.: Strömungstechnik der gasbeaufschlagten Axialturbine. Springer, Berlin (1963)
Cumpsty, N.A.: Part circumference casing treatment and the effect on compressor stall. In: ASME Gas Turbine and Aeroengine Congress, Paper 89 GT312, Toronto (1989)
Cumpsty, N.A.: Compressor Aerodynamics. Longman Group Ltd. Pearson Education Ltd. Harlow (1989)
Cumpsty, N.A.: Jet Propulsion. Cambridge University Press (1997)
Danner, F.C.T., Kau, H.-P., Müller, M.M., Schiffer, H.-P., Brignole, G.A.: Experimental and Numerical Analysis of Axial Skewed Slot Casing Treatments for a Transonic Compressor Stage. GT2009-59647, ASME Turbo Expo 2009, Orlando (2009)
David, O., Hourmouziadis, J., Marx, N.: Auslegungsdiagramme für Axialturbinenstufen. Kiepert-Verlag, Berlin (1969)
Dawson, R.E., Pashley, D.G., Melville, L.E.: Technology of the wide chord fan blade. AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Huntsville, Alabama, AIAAPaper 86 1748 (1986)
Day, I.J.: Axial compressor stall. Dissertation, University of Cambridge (1976)
Denton, J.D.: Loss mechanisms in turbomachines. ASME J. Turbomach. 115, 621–656 (1993)
Deutsche Gesellschaft für Luft- und Raumfahrt: Die deutschen Senkrechtstartflugzeuge. DGLR-Bericht 2000-01 (2000)
Dietrichs, H.J., Hourmouziadis, J., Malzacher, F., Bräunling, W.: Flow phenomena in transonic turbine cascades. detailed experimental and numerical investigation. In: 8th International Symposium on Air Breathing Engines (ISABE), Cincinnati (1987)
Dietrichs, H.-J., Malzacher, F., Broichhausen, K.: Development of a HP-turbine for a small helicopter engine. In: AGARD Conference on Technology Requirements for Small Gas Turbines, conference proceedings No. 537, Montreal, CDN (1993)
Dorney, D.J., Flitan, H.C., Ashpis, D.E., Solomon, W.J.: Effects of Blade Count on Boundary Layer Developement in a Low Pressure Turbine. AIAA 2000-0742, S. 1–17 (2000)
Dunham, J.: A review of cascade data on secoundary losses in turbines. J. Mech. Eng. Sci. 12(1) (1970)
Dunkler, R. et al.: Redesign and performance analysis of a transonic axial compressor stator and equivalent plane cascades with subsonic controlled diffusion blades. In: ASME Gas Turbine Conference, Phoenix, Arizona, Paper 83 GT 208 (1983)
Dunker, R.: Theoretische und experimentelle Untersuchungen über die Verdichtungsstoßverluste in transsonischen Axialverdichtern, DFVLR-FB 88-38 (1988)
Dupslaff, M.: Stabilität hochbelasteter Verdichtersysteme in Mehrwellen-Triebwerken, MTU, Technischer Bericht 84/009 (1984)
Ebenhoch, G., Maar, K., Winkler, P., Jeschke, P., Selmeier, R.: PW6000 Hochdruckverdichter: Vom Technologieprogramm zur Serienanwendung. DGLR-Kongress München (2003)
Eckert, B.: Die Gasturbine als Antriebsmaschine für das schwere Straßenfahrzeug, MTZ 31 (1970)
Eckert, B., Schnell, E.: Axial und Radialkompressoren, 2. Aufl. Springer, Berlin (1961)
Eckardt, D.: Instantaneous measurements in the jet wake discharge flow of a centrifugal compressor impeller. In: ASME Gas Turbine Conference, Zurich, Paper 74 GT 90 (1974)
Eckardt, D.: Detailed flow investigations with in a high speed centrifugal compressor impeller. In: ASME Gas Turbine and Fluids Engineering Conference, New Orleans, La., Paper 76 FE 13 (1976)
Eckardt, D.: Jet wake mixing in the diffuser entry region of a high speed centrifugal compressor. In: Proceedings Joint Symposium on Design and Operation of Fluid Machinery, Colorado State University Fort Collins, Colorada (1978)
Eckert, E.R.G.: Analysis of film cooling and full coverage film cooling of turbine blades. transactions of the ASME. J. Gas. Turb. Power 106, 206–213 (1984)
Emmrich, R., Hönen, H., Niehuis, R.: Time resolved investigations of an Axial Compressor with Casing Treatment Part 2 – Simulation, ASME Paper GT2007-27582 (2007)
Emmons, H.W., Pearson, C.E., Grant, H.P.: Compressor Surge and Stall Propagation. Trans. ASME 77, 455–469 (1955)
Engber, M., Rüd, K., Ardey, S., Gier, J., Waschka, W.: Advanced Technologies for Next Generation Regional Jets – Survey of Research Activities at MTU Aero Engines. ISABE Paper ISABE-2007-1282 (2007)
Eulitz, F.: Numerische Simulation und Modellierung der instationären Strömung in Turbomaschinen. Dissertation, Ruhr Universität Bochum, Forschungsbericht 2000–05 (2000)
Eulitz, F., Engel, K., Pokorny, S.: Numerical Investigation of Inviscid and Viscous Interaction in a Transonic Compressor. AGARD-CP-571, S. 38.1–38.13 (1996)
Fabri, J.: Rotating Stall in Axial Compressors. Translation into English by NASA, TT F 11, 765 (1967)
Farokhi, S.: Analysis of rotor tip clearance loss in axial-flow turbines. AIAA J. Propul. 4(5) (1988)
Fink, D.A., Cumpsty, N.A., Greitzer, E.M.: Surge dynamics in a free-spool centrifugal compressor system. J. Turbomach. (1992)
Fiola, R.: Berechnung des instationären Betriebsverhaltens von Gasturbinen unter besonderer Berücksichtigung von Sekundäreffekten. Dissertation, Technische Universität München, Berlin (1993)
Flagg, E.E.: Analytical Procedure and Computer Program for Determining the Off Design Performance of Axial Flow Turbines. NASA CR 710 (1967)
Fottner, L.: A semi empirical approach of the transonic flow past cascades including shock and viscous effects, Adv. Group for Aeron. Res. and Development (AGARD), Conference Proceedings Nr 34, Paris (1968)
Fottner, L.: Loss correlation for two dimensional cascades at the design point with incompressible flow. Technischer Bericht MTU 69/13 (1969)
Fottner, L.: Ein halbempirisches Verfahren zur Bestimmung der reibungsbehafteten transsonischen Schaufelgitterströmung mit Einschluß von Überschallfeldern und Verdichtungsstößen. Dissertation, Technische Hochschule München (1970)
Fottner, L.: Strömungsmaschinen I, II. UniBW (1985)
Freeman, C., Cumpsty, N.A.: Method for the prediction of supersonic compressor blade performance. J. Propul. 8(1), 199–208 (1992)
Fritsch, G., Hoeger,M., Blaha, C., Bauer, D.: Viscous 3D compressor simulations on parallel architectures – design tool development and application to a transonic compressor stage. AIAA Paper 97-2876 (1997)
Fröbel, T., Groth, C., Gümmer, V., Kau, H.-P.: Numerical investigation of unsteady flow phenomena in an hp axial compressor incorporating stator shroud cavities. In: 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibition, Nashville Tennessee (2010)
Fullagar, K.P.L.: The Design of Air Cooled Blades. British Aeronautical Research Council Report 35684, HMT 361 (1974)
Furukawa, M., Inoue, M., Saiki, K., Yamada, K.: The Role of Tip Leakage Vortex Breakdown in Compressor Rotor Aerodynamics, ASME 98-GT-239, Stockholm (1998)
Gabler, R.: Betriebsverhalten von Wellenleistungsgasturbinen bei Verdichterinstabilitäten und Methoden zur Realisierung. Dissertation, TU München (1998)
Gallimore, S.J.: Spanwise mixing in multi stage axial compressors. Dissertation, University of Cambridge (1985)
Kurzke, J.: GasTurb – A Program for Gas Turbine Performance Calculations. Manual. Gasturb GmbH Aachen. www.gasturb.de (2010)
Kurzke, J.: GasTurbDetails – utility for gasturb performance simulations. Manual. Gasturb GmbH Aachen. (www.gasturb.de) (2010)
Gasch, R., Nordmann, R., Pfützner, H.: Rotordynamik, 2. Aufl. Springer, Berlin (2002)
Gasparovic, N. et al. (Hrsg.): Gasturbinen. Probleme und Anwendungen. VDI-Verlag, Düsseldorf (1967)
Glassman, A.J.: Turbine design and application, Bd. 1 (1972), 2 (1973), 3 (1975). NASA SP-290 (1972)
Glassman, A.J.: Turbine Design and Application, Bd. 1 (1972), 2 (1973), 3 (1975). NASA SP-290 (1973)
Glassman, A.J.: Computer Program for Design and Analysis of Radial Inflow Turbines. NASA Technical Note, TN 8164 (1976)
Grahl, K.: Kennfelderweiterung aerodynamisch hochbelasteter Axialverdichter durch Leitradumstaffelung, Fortschritt-Bericht VDI Reihe 7 Nr 83. VDI-Verlag, Düsseldorf (1984)
Grahl, K., Schwarz, S.: Theoretische Untersuchungen des Betriebsverhaltens von Gasturbinen mit einem Simulationsprogramm unter Einbeziehung der Kennfeldrechnung, Fortschritt-Bericht VDI Reihe 7 Nr. 103, VDI-Verlag, Düsseldorf (1985)
Grahl, K.G.: Turbomaschinen I. Vorlesung Turbomaschinen TM I. Ruhr-Universität, Bochum (1993)
Grauer, F.: Entwicklung einer Pumpgrenzwarnung für mehrstufige, hochbelastete Axialverdichter, Fortschritt-Berichte VDI, Reihe 7, Nr. 355, Düsseldorf (1999)
Greitzer, E.M.: Surge and rotating stall in axial flow compressors. In: ASME Gas Turbine Conference, Houston. Paper 75 GT 9 (1975)
Greitzer, E.M. et al.: A fundamental criterion for the application of rotor casing treatment. J. Fluids Eng. 101 (1978)
Greitzer, E.M., Nikkanen, J.P., Haddad, D.E., Mazzawy, R.S., Joslyn, H.D.: A fundamental criterion for the application of rotor casing treatment. J. Fluids Eng. 101, 237–243 (1979)
Greitzer, E.M.: The stability of pumping sytsems. ASME J. Fluids Eng. 103 (1981)
Grieb, H.: Projektierung von Turboflugtriebwerken. Birkhäuser, Basel (2004)
Grieb, H.: Verdichter für Turbo Flugtriebwerke. Springer, Berlin (2009)
Grieb, H., Schäffler, A.: Seitenwandgrenzschichten in Axialverdichtern, DGLR Fachausschuss für luftatmende Triebwerke. Friedrichshafen (1972)
Grieb, H., Schäffler, A., Laudenberg, H.: Entwicklungsprobleme an Axialverdichtern für Kleingasturbinen. DGLR Fachausschuss für luftatmende Triebwerke, Frankfurt (1974)
Grieb, H., Schill, G., Gumicio, R.: A semi empirical method for the determination of multistage axial compressor efficiency. In: ASME Gas Turbine Conference, Houston, Texas, Paper 75 GT 11 (1975)
Gümmer, V., Wenger, U., Kau, H.-P.: Using sweep and dihedral to control three-dimensional flow in transonic stators of axial compressors. In: ASME 2000-GT-491, ASME Conference, Munich (2000)
Gümmer, V.: Pfeilung und V-Stellung zur Beeinflussung der dreidimensionalen Strömung in Leiträdern transsonischer Axialverdichter. Disserration, TU München (1999)
Haake, M., Staudacher, S., Fiola, R.: 1-dimensionaler, stufenweiser Modellierungsansatz zur Simulation des Pump- und Stallverhaltens von mehrstufigen Axialverdichtersystemen. DLR-Kongress 2008, Darmstadt, DLRK 2008-81308 (2008)
Hagen, H.: Fluggasturbinen und ihre Leistungen. Verlag G. Braun, Karlsruhe (1982)
Hah, C., Wennerstrom, A.J.: Three-dimensional flowfields inside a transonic compressor with swept blades. ASME J. Turbomach. 113, 241–251 (1991)
Hah, C., Puterbaugh, S.L., Wadia, A.R.: Control of Shock Structure and Secondary Flow Field Inside Transonic Compressor Rotors Through Aerodynamic Sweep. ASME paper 98-GT-561 (1998)
de Haller, P. Das Verhalten von Tragflügelgittern in Axialverdichtern und im Windkanal. Brennstoff-Wärme-Kraft. Z Energ tech Überw 5(4) (1953)
Haller, J.: Ein Berechnungsverfahren für verlustbehaftete transsonische Schaufelgitterströmungen in mehrstufigen Turbomaschinen mit Koppelung von Rechnungen in der Meridianebene und auf rotationssymmetrischen Profilschnittflächen. Dissertation, Universität Stuttgart (1989)
Hall, E.J., Crook, A.J., Delaney, R.A.: Aerodynamic analysis of compressor casing treatment with a 3-D Navier-Stokes Solver. AIAA Paper 94-2796 (1994)
Happel, H.W.: Application of a 2D Time Marching Euler Code to transonic turbomachinery flow. In: Proceedings of the 6 GAMM Conference on Numerical Methods in Fluid Mechanics. Vieweg Verlag, Braunschweig (1985)
Hausenblas, H.: Vorausberechnung des Teillastverhaltens von Gasturbinen. Springer, Berlin (1962)
Heilmann, W.: Die Entwicklung von Gasturbinen kleiner Leistung mit regenerativem Wärmetauscher in der MTU. MTZ 38 (1977)
Heinig, K.E.: Sound propagation in multi-stage axial flow turbomachines. In: AIAA Aeroacoustics Conference, Palo Alto, Paper 81-2047 (1981)
Hembera, M., Kau, H.-P., Johann, E.: Simulation of casing treatments of a transonic compressor stage, ISROMAC 12 Paper ISROMAC12-2008-20042 (2008)
Hembera, H.: Numerischer Entwurf von effizienten Casing Treatments für einen 4,5-stufigen Hochdruckverdichter. Dissertation, TU München (2009)
Henne, J.: Turning technology into products. MTU aero engines. In: Invited 20th ISABE Conference 2011, Gothenburg (2011)
Henne, J.: Technologie und Entwicklung von Triebwerken der nächsten Generation. Vorlesung, TU München (2012)
Henne, J.M.: Instationäre Stoß- und Grenzschichtphänomene an Einzelprofilen und in einem ebenen Gitter bei transsonischer Strömung. Dissertation, RWTH Aachen (1989)
Hiebel, J.-H.: Beitrag zur Berechnung von stationären Unter- und Ueberschallströmungen durch Turbomaschinen unter Berücksichtigung von Strömungsverlusten und Wärmeflüssen. Dissertation universität Stuttgart (1980)
Hilgenfeld, L.: Turbulenzstrukturen in hochbelasteten Transsonik-Verdichtergittern unter besonderer Berücksichtigung der Verdichtungsstoß-Grenzschicht-Interferenz. Dissertation, Universität der Bundeswehr (2006)
Hirsch, C.: Numerical Computation of Internal and External Flows: Introduction to the Fundamentals of Computational Fluid Dynamics. Butterworth Heinemann Verlag (2007)
Hirsch, C.: CFD Methodology and Validation for Turbomachinery Flows. AGARD Lecture Series 195 (1994)
Hirsch, Ch., Kang, S., Pointel, G.: A Numerically Supported Investigation of the 3D Flow in Centrifugal Impellers, Part II: Secondary Flow Structure. In: ASME Gas Turbine and Aeroengine Congress, Birmingham, UK, Paper 96 GT 152 (1996)
Hoeger, M., Lahmer, M., Dupslaff, M., Fritsch, G.: A correlation for tip leakage blockage in compressor blade passages. ASME J. Turbomach. 122, 426–432 (2000)
Hofmann, W., Ballmann, J.: Flow Mechanisms in a Transonic Turbocompressor at Conditions Near Stall. ISABE Paper ISABE-2005-1139 (2005)
Hoheisel, H., Seyb, N.J.: The Boundary Layer Behaviour of Highly loaded Compressor Cascade at Transonic Flow Conditions. In: AGARD Conference on Transonic and Supersonic Phenomena in Turbomachines, München, CP 401 (1986)
Hoheisel, H., Kiock, R., Lichtfuss, H.J., Fottner, L.: Influence of free stream turbulence and blade pressure gradient on boundary layer and loss behavior of turbine cascades. Trans. ASME. J. Turbomach. 109, 210–219 (1987)
Horn, W.: Verbesserung des Betriebsverhaltens von Turboflugtriebwerken durch aktiv geregelte Verdichter, Dissertation, Universität Stuttgart (2010)
Horlock, J.H.: Axial Flow Compressors. Butterworth, London (1958)
Horlock, J.H.: Axialkompressoren. Verlag G. Braun, Karlsruhe (1967)
Horlock, J.H.: Axial Flow Turbines. Fluid Mechanics and Thermodynamics. Reprint by Krieger Publishing, Malabar (1985)
Hourmouziadis, J., Kreiner, H. B.: Component design and development for future helicopter. Seventh European Rotorcraft and Powered Lift Aircraft Forum, DGLR, Garmisch Partenkirchen (1981)
Hourmouziadis, J., Klussmann, W.: Zukünftige Entwicklung von wirtschaftlichen Wellenleistungsgasturbinen. MTU München, Seminar für Flugantriebe und Gasturbinen, T.U. München (1982)
Hourmouziadis, J.: Aerodynamie Design of Low Pressure Turbines. AGARD LS-167, S 8.1–8.40 (1989)
Hübner, J.: Experimentelle und theoretische Untersuchung der wesentlichen Einflussfaktoren auf die Spalt- und Sekundärströmung in Verdichtergittern. Dissertation, Universität der Bundeswehr (1996)
Huck, W.: Beitrag zum Einfluss der Reynoldszahl bei Axialverdichtern im gesamten Betriebsbereich. Dissertation, Universität Stuttgart (1974)
Irmisch, S.: Numerische Simulation der Turbinenschaufelströmung mit Kühlluftausblasung unter Einbeziehung der Kühlluftkanäle. Dissertation, Universität Stuttgart (1995)
Johnson, I.A., Bullock, R.O.: NASA SP36, Chapter III…VIII, Aerodynamic Design of Axial Flow Compressors. National Aeronautics and Space Administration, Washington (1965)
Kablitz, S.: Beeinflussung der Spaltströmung von Transsonischen Axialverdichtern durch Forward Sweep. Dissertation, Technische Universität Darmstadt (2003)
Kablitz, S., Hennecke, D.K., Passrucker, H., Engber, M.: Experimental analysis of the Influence of sweep on tip leakage vortex structure of an axial transonic compressor stage. In: Proceedings of the 16th Symposium Air Breathing Engines (ISABE-2003-1226), Cleveland (2003)
Kalide, W.: Energieumwandlung in Kraft- und Arbeitsmaschinen, 7. Aufl. Hanser Verlag, München (1989)
Kappei, F.: Höhenverhalten des Niederdruckturbinenwirkungsgrades bei Turboflugtriebwerken. Dissertation, Universität Stuttgart (2007]
Karadimas, G.: Application of Computational Systems to the Development of Turbomachine Components. Revue Scientifique Snecma, No.l, S. 25-36 (1990)
Kasper, C., Rose, M.G., Staudacher, S., Gier, J.: A study of unsteady secondary flow in a water flow axial turbine model. ASME GT2008-50239, 2008, Berlin (2008)
Kasper, C., Aurahs, L., Rose, M., Staudacher, S., Gier, J.: Water flow model turbine flow visualization study of the unsteady interaction of secondary flow vortices with the downstream rotor 8th ETC, Graz (2009)
Kau, H.-P.: Berechnung der zweidimensionalen, instationären Durchströmung axialer Turbomaschinengitter mit einem expliziten Zeitschrittverfahren. Dissertation, RWTH Aachen (1990)
Kau, H.-P.: Compressor matching and designing for tip clearance, Invited Lecture RTO/AGARD, Lecture Series 211 Multidiscipliniary design of multistage compressors, RTO-EN-1 AC/323(AVT)TP/1, Lyon (1998a)
Kau, H.-P.: The multidisciplinary design process, Invited Lecture RTO/AGARD. Lecture Series 211 Multidiscipliniary design of multistage compressors, RTO-EN-1 AC/323(AVT)TP/1, Lyon (1998b)
Khalid, S.A., Khalsa, A.S., Waltz, I.A., Tan, C.S., Greitzer, E.M., Cumpsty, N.A., et al.: Endwall Blockage in Axial Compressors. ASME J. Turbomach. 121, 499–509 (1999)
Klauke, T.: Schaufelschwingungen realer integraler Verdichterräder im Hinblick auf Verstimmung und Lokalisierung. Dissertation, Technische Universität Cottbus, 2007 (2007)
Köcke, S.: Simulation eines Höhenprüfstands zur Untersuchung der Verdichter-Pumpverhütungs-Regelung. Dissertation, Universität Stuttgart (2010)
Kolulovic, D.: Modellierung des Grenzschichtumschlags bei Turbomaschinenströmungen unter Berücksichtigung mehrerer Umschlagsarten, Forschungsbericht DLR-FB-2007-20 (2007)
Köller, U.: Entwicklung einer fortschrittlichen Profilsystematik für stationäre Gasturbinenverdichter. Dissertation, Ruhr Universität, Bochum (1999)
Kosing, O.E., Scharl, R., Schmuhl, H.J.: Design improvements of the EJ200 HP compressor, from design verification engine to a future all blisk version. In: Proceedings of ASME Turbo Expo, New Orleans, Louisiana, Paper 2001 GT 0283 (2001)
Kost, F., Bräunling, W., Schüpferling, E., Göhl, R.: Detection of separation bubbles by heated thin film sensors in transonic turbine cascades. In: Proceedings of the 9th Symposium of Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines, Oxford, 21.–22. März 1988
Kroll, F.: Simulation und Regelung eines Brennstoffzelle- Gasturbine-Hybridkraftwerks. Dissertation, Universität Stuttgart (2012)
Kühhorn, A., Beirow, B., Parchem, R., Klauke, T.: Schaufelschwingungen bei realen Verdichter-Integralrädern (BLISK). Deutscher Luft- und Raumfahrtkongress, Beitrag DGLR-2006-211 (2006)
Künkler, H., Tönskötter, H.: Zum Einfluß stationärer Temperatur- und Druckstörungen auf die Strömung in einem installierten Strahltriebwerksverdichter. ZFW 3(6) (1979)
Kurzke, J.: Performance Modeling Methodology: Efficiency Definitions for Cooled Single and Multistage Turbines. ASME 2002-GT-30497 (2002)
Kurzke, J.: Model based gas turbine parameter corrections. In: Proceedings of ASME TURBO EXPO 2003: Power to Land, Sea & Air, GT2003-38234 (2003)
Kurzke, J.: GasTurb 11, Program for Design and Off Design Performance of Gasturbines www.gasturb.de (2007)
Kurzke, J.: Calculation of Installation Effects within Performance Computer Programs. AGARD LS-183, S. 7.1–7.19 (1992)
Kurzke, J.: Advanced User-Friendly Gas Turbine Performance Calculations on a Personal Computer. ASME 95-GT-147 (1995)
Kypuros, J.A., Melcher, K.J.: A Reduced Model for Prediction of Thermal and Rotational Effects on Turbine Tip Clearance. NASA TM-2003-212226 (2003)
Lakshminarayana, B.: Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachinery. J. Basic Eng. Trans. ASME (1970)
Lakshminarayana, B.: Fluid Dynamics and Heat Transfer of Turbomachinery. John Wiley, New York (1996)
Lechner, C., Seume, J., et al. (Hrsg.): Stationäre Gasturbinen. Springer, Berlin (2003)
Lehthaus, F.: Berechnung der transsonischen Strömung durch ebene Turbinengitter nach dem Zeitschritt-Verfahren. Dissertation, TU Braunschweig (1977)
Lehthaus, F., Lawaczeck, O.: Untersuchungen über die transsonische Strömung durch Turbinen Schaufelgitter. VDI Forschungs-heft 586. VDI Verlag, Düsseldorf (1978)
Lichtfuss, H.-J.: Customized Profiles – The Beginning of an Era, ASME Paper GT2004-53742 (2004)
Lichtfuß, H.J., Dupslaff, M.: Pumpgrenzenbestimmung eines Axial/Radial-Kombinationsverdichters bei gegebenen Einzelkennfeldern. MTU/EW Notiz 82/048 (1982)
Lieblein, S., Schwenk, F.C., Broderick, R.L.: Diffusion Factor for Estimating Losses and Limiting Blade Loadings in Axial Flow Compressor Blade Elements. NACA RM E53D01 (1953)
Lieblein, S.: Loss and Stall Analysis of Compressor Cascades. ASME Annual Meeting, New York, Paper 58 A 91 (1958)
Lieblein, S.: Experimental Flow in 2D-Cascades. Chapter VI of Aerodynamic Design of Axial Flow Compressor. NACA RME 561303, 1956, NASA SP 36 (1965)
Linke-Diesinger, A.: Systems of Commercial Turbofan Engines. An Indroduction to System Functions. Springer, Berlin (2008)
Arbeitskreis Triebwerk: Luftfahrttechnisches Handbuch, Band Triebwerkstechnologie. LTH Koordination IABG (1994)
Mailach, R., Lehmann, I., Vogeler, K.: Rotating instabilities in an axial compressor originating from the fluctuating blade tip vortex. ASME J. Turbomach. 123, 453–463 (2001)
Mailach, R., Lehmann, I., Vogeler, K.: Periodical Unsteady Flow within a Rotor Blade Row of an Axial Compressor – Part 1: Flow Field at Midspan. ASME Paper GT2007-27210 (2007)
Moffat, T.J., Cleghom, W.L.: Prediction of bird impact pressures and damage using MSC/Dytran. In: Proceedings of ASME Turboexpo, New Orleans, Paper 2001GT 0280 (2001)
Mokelke, H.: Circumferential inlet flow distortions in multistage axial compressors. Dissertation, Ph.D., Cambridge (1974)
Moll, C.: Kennwertermittlung und Systemanalyse des thermomechanischen Verhaltens von Turbomaschinenkomponenten. Dissertaion, Universität Stuttgart (2006)
Moore, R.D., Reid, L.: Performance of Single Stage Axial Flow Transonic Compressor with Rotor and Stator Aspect Ratios of 1.63 and 1.78, Respectively, and with Design Pressure Ratio of 1.82, NASA Technical Paper 1974 (1982)
Moore, L., Moore, J.G., Timmis, P.H.: Performance Evaluation of Centrifugal Compressor Impellers Using Three Dimensional Viscous Flow Calculations. In: ASME Gas Turbine Conference, Phoenix, Paper 83 GT 62 (1983)
Moore, F.K., Greitzer, E.M.: A theory of post stall transients in axial compression systems: part 1 : development of equations. In: ASME Gas Turbine Conference, Houston, Paper 85 GT 171 (1985)
Muggli, W.: Zum Betriebsverhalten von Turboluftstrahlantrieben unter besonderer Berücksichtigung der gekühlten Hochdruckturbine. Dissertation, Technische Universität München (1981)
Muggli, W., Rick, H.: Zur Berechnung der Kennfelder gekühlter mehrstufiger Axialturbinen. MTZ 1 (1982)
Münzberg, H.G.: Flugantriebe. Grundlagen, Systematik und Technik der Luft und Raumfahrtantriebe. Springer, Berlin (1972)
Münzberg, H.G., Kurzke, J.: Gasturbinen – Betriebsverhalten und Optimierung. Springer, Berlin (1977)
Nagel, M.G.: Numerische Optimierung dreidimensionaler parametrisierter Turbinenschaufeln mit umfangsunsymmetrischen Plattformen – Entwicklung, Anwendung und Validierung. Dissertation, Universität der Bundeswehr (2004)
Nakaten, D.: Untersuchung zum Einfluss von Eintrittsstörungen auf das Betriebsverhalten von Verdichtern. Dissertation, Universität Stuttgart (2012)
NASA: Aerodynamic design of Axial Flow Compressors. NASA SP-36 (1965)
Peitzsch, D., Friedl, W.H.: Detailed Investigation of the Flow within the Secondary Air System in High Pressure Turbines of Aero Engines. ISABE 2003-1038 (2003)
Peters, M. et al.: Effective Thermal Barrier Coatings for Modern Turbine Engine Design. European Propulsion Forum on Design of Aero Engines for Safety, Reliability, Maintainability and Cost, Berlin (1997)
Preiß, A.: Eintrittsstörungen bei Fluggasturbinen unter besonderer Berücksichtigung instationärer Gaszusammensetzungen. Dissertation, TU München (2001)
Prince, D.C. Jr., Wisler, D.C., Hilvers, D.E.: A Study of Casing Treatment Stall Margin Improvement Phenomena. ASME Paper 75-GT-60 (1975)
Raab, I., Artmeier, M., Wilfert, G.: Technologieerprobung für schnelllaufende Niederdruckturbinen für wirtschaftliche und umwelt-schonende Triebwerke. MTU Technik Berichte, DGLR Jahrestagung (2000)
Rick, H., Kurzke, J.: Zur Kennfeldberechnung ein- und mehrstufiger Axialturbinen bei vorgegebener Stufengeometrie. 47th AGARD-Meeting, Köln (1976)
Rick, H., Muggli, W.: Zur Berechnung von Kennfeldern mehrstufiger Axialturbinen. MTZ 1 (1982)
Rick, H.: Zur digitalen Simulation des stationären und instationären Betriebs- und Leistungsverhaltens von Fluggasturbinen insbesondere von Hubschrauber-Triebwerken. Habilitationsschrift, TU München (1982)
Rick, H., Muggli, W.: Generalized digital simulation technique with variable engine parameter input for steady state and transient behaviour of aero gas turbines. In: 60th Symposium of Propulsion and Energetics Panel (AGARD), Marathon, 11.–14. Okt. 1982
Riegler, C., Bauer, M., Kurzke, J.: Some Aspects of Modelling Compressor Behavior in Gas Turbine Performance Calculations, ASME 2000-GT-0574. J. Turbomach. (2001)
Ries, T., Baumann, J., Rose, M., Rist, U., Staudacher, S.: LP-Turbine laminar separation bubble study: flat plate DNS calculations and preliminary PIV data. In: 8th ETC, Graz (2009)
Ries, T., Mohr, F., Baumann, J., Rose, M., Rist, U., Raab, I., Staudacher, S.: LP Turbine laminar separation with actuated transition; DNS, experiment and fluidic oscillator GT2009-59600. ASME Turbo Expo, Orlando (2009)
Rieß, W., Walbaum, M.: Initiation and propagation of flow instabilities in multi stage axial compressors. In: AGARD PEP Symposium on „Loss Mechanisims and Unsteady Flows in Turbomachines“, Derby, Paper 30 (1995)
Riegler, C.: Modulares Leistungsberechnungsverfahren für Turboflugtriebwerke mit Kennfelddarstellung für Wärmeübertragungsvorgänge. Dissertation, Universität Stuttgart (1997)
Rist, D., Graggo, W.: Auslegungsdiagramme von Turbinenstufen mit zwei gegenläufigen Rotoren. Institutsbericht, Institut für Flugantriebe, TU München (1970)
Rodgers, C.: Effects of Blade Number on the Efficiency of Centrifugal Compressor Impellers. ASME Turbo Expo, Munich, Paper 2000 GT 455 (2000)
Rolls Royce: The Jet Engine. Rolls Royce plc, London (2005)
Rolls Royce: The Jet Engine, Rolls Royce plc, London (1969)
Rolls Royce: The Jet Engine. Rolls Royce plc, London (1986)
Rolls Royce: The Jet Engine, 5. Aufl. Rolls Royce plc, London (1995)
Römer, N.: Theoretische und experimentelle Untersuchungen zum Umschlagverhalten der Profilgrenzschicht an Verdichter- und Turbinengittern. Dissertation, Universität der Bundeswehr (1990)
RTO Applied Vehicle Technology, NATO: Performance Prediction and Simulation of Gas Turbine Engine Operation for Aircraft, Marine, Vehicular, and Power Generation. NATO RTO Technical Report TR-AVT-036 www.rto.nato.int (2007)
SAE: Aircraft Propulsion System, Performance, Station Designation and Nomenclature. SAE AS 755 C (1997)
Salchow, K.: Verbesserung des instationären Betriebsverhaltens von Turboflugtriebwerken durch Leitgitterverstellung und Abblasung im Verdichter. Dissertation, Universität Stuttgart (2001)
Sbresny, H.: Ein zweidimensionales, hybrides Rechenverfahren für Turbinenschaufelströmungen mit Kühlluftausblasung auf adaptiven strukturiert-unstrukturierten Gittern. Dissertation, Universität Stuttgart (2001)
Schaber, R.: Numerische Auslegung und Simulation von Gasturbinen. Dissertation, TU München (2001)
Schumann, T., Kasper, C., Staudacher, S., Gier, J.: Untersuchung von geometrischen Einflussparametern bei Grenzschichteinblasung an hochbelasteten Niederdruckturbinenprofilen am Wasserkanal. DGLR-2006-192 (2006)
Schäffler, A.: Das Verhalten von TL-Triebwerken beim Antrieb durch den Flugstau (Windmilling). AVA-Forschungsbericht Nr. 62-02 (1962)
Scholz, N.: Aerodynamik der Schaufelgitter, Bd. 1. Verlag G. Braun, Karlsruhe (1965)
Schmidt-Eisenlohr, U.: Auslegung eines Radialverdichters mit rückwärts gekrümmten Rotorschaufeln und großer Kennfeldbreite, MTU Techn. Bericht 75/005 (1975)
Schäffler, A.: Aerodynamische Instabilität in mehrstufigen Axialverdichtern. MTU Bericht 79/25 (1979)
Schäffler, A.: Experimental and analytical investigation of the effects of Reynolds number and blade surface roughness on multistage axial flow compressors. In: ASME Gas Turbine Conference, San Diego, Paper 79 GT 2 (1979)
Schäffler, A.: Methoden zur Auslegung und Entwicklung transsonischer Axialverdichter. MTU-Bericht Heft 36,1982 (1982)
Schreiber, H.A., Starken, H.: Experimental Cascade Analysis of a Transonic Compressor Rotor Blade Section. ASME Paper 83GT209 (1983)
Schreiber, H.A.: Shock Losses in Transonic and Supersonic Compressor Cascades. VKI lecture series 1988 03 (1988)
Schmücker, L., Schäffler, A.: Performance deterioration of axial compressors due to blade defects. In: AGARD Symposium on Erosion, Corrosion and Foreign Object Damage Effects in Gas Turbines, Rotterdam, Conference Proceedings 558 (1994)
Schlechtriem, S., Lötzerich, M.: Breakdown of Tip Leakage Vortices in Compressors at Flow Conditions Close to Stall. ASME Paper 97-GT-41 (1997)
Serovy, G.K.: Compressor and Turbine Performance Prediction System Development – Lessons From 30 Years of History. AGARD LS-83 (1976)
Siden, G., Kau, H.-P.: Thermodynamische Auslegung der Niederdruckturbinen der BR700 Triebwerksfamilie. DGLR- Jahrestagung, Bonn (1995)
Sigloch, H.:Technische Fluidmechanik, 8. Aufl. VDI-Verlag GmbH, Düsseldorf (2011)
Sigloch, H.: Technische Fluidmechanik, 2. Aufl. VDI-Verlag GmbH, Düsseldorf (1991)
Sigloch, H.: Strömungsmaschinen. Grundlagen und Anwendungen, 5. Aufl. Carl Hanser Verlag, München 1984 (2013)
Spieler, S., Staudacher, S., Kappmeyer, G., Lou, W.: Reparaturverfahren und ihre Bedeutung für die Bewertung von Blisks über den Lebenszyklus von Flugtriebwerken. DGLR-2006-160 (2006)
Spirkl, A.: Zur Diagnose von Komponentenstörungen in Turboluftstrahlantrieben mit gasdynamischer Para meterüberwachung. Dissertation TU München (1981)
Staudacher, S., Linke, A., Fiola, R.: A comparison of methods for the extrapolation of turbomachinery performance maps for the use in performance synthesis programs. In: European Turbomachinery Conference (2002)
Staudacher, S., Berns, W., Haiwen, Y.: Modeling Multistage Compressors by Several Split Compressors. ISABE Paper (2003)
Starken, H., Lichtfuß, H.J.: Supersonic cascade performance. AGARD Lecture Series XXXIX Advanced Compressors, Brussels (1970)
Staudacher, S.: Untersuchung zum sekundären Luftsystem von Luftstrahltrieb werken. Dissertation, TU München (1995)
Steffens, K., Schäffler, A.: Triebwerksverdichter-Schlüsseltechnologie für den Erfolg bei Luftfahrtantrieben. DGLR-Jahrestagung (2000)
Steffens, K., Schäffler, A., Buckl, F.: Entwicklungstendenzen im Luftfahrttriebwerksbau, DGLR 1999-075 (1999)
Steffens, K.: Technik der Luftfahrtantriebe. Vorlesung, RWTH Aachen (2003)
Stenning, A.H.: Rotating stall and surge. ASME J. Fluids Eng. 102 (1975)
Steinhardt, E.: The use of non linear rotor dynamics in aero engines. In: European Propulsion Forum, ONERA, Paris (1991)
Steffens, K.; Schäffler, A., Buckl, F.: Entwicklungstendenzen im Luftfahrttriebwerksbau. DGLR 1999-075 (1999)
Stodola, A.: Steam and Gas Turbines. McGraw Hill Book Company, New York (1927)
Storer, J.A., Cumpsty, N.A.: An approximate analysis and prediction method for tip clearance loss in axial compressors. In: ASME Gas Turbine and Aeroengine Congress, Cincinati, Paper 93 GT 140 (1993)
Suciu, S.N.: High temperature turbine design considerations. In: AGARD Conference on High Temperature Turbines, Conference Proceedings No. 73, Florence (1970)
Thomer, O.: Numerische Untersuchung der Wechselwirkung von Längswirbeln mit senkrechten und schrägen Verdichtungsstößen. Dissertation, RWTH Aachen (2003)
Traupel, W.: Thermische Turbomaschinen, Bd. 1, 1. Aufl. Springer, Berlin (2000)
Traupel, W.: Thermische Turbomaschinen, Bd. II, 1. Aufl. Springer, Berlin (2000)
Traupel, W.: Thermische Turbomaschinen, Bd. I, 3. Aufl. Springer, Berlin (1982)
Uhlmann, G., Rick, H.: Weiterentwicklung von Analyseverfahren zur aktiven Stabilitätsverbesserung mit Schwerpunkt Wavelet-Methode. (2001)
Uhlmann, H.-G.: Früherkennung aerodynamischer Verdichterinstabilitäten mittels Wavelet-Transformationsregeln. Dissertation, TU München (2003)
Vavra, M.H.: Aero Thermodynamics and Fluid Flow in Turbomachines. John Wiley, New York (1960)
Volkmann, H., Fottner, L., Scholz, N.: Aerodynamische Entwicklung eines dreistufigen Transsonik Frontgebläses. Z. Flugwiss. 22(4) (1974)
Wagner, S.: Modellbasiertes Regelkonzept für den störunempfindlichen Betrieb eines Axialverdichters mit reduziertem Pumpgrenzabstand. (2002)
Walbaum, M.: Entstehungsmechanismen und Erscheinungsformen des Rotating Stall in einem sechsstufigen Axialverdichter mit verstellbaren Leitschaufeln, Fortschr.-Ber. VDI Reihe 7, Nr. 352. VDI Verlag, Düsseldorf (1999)
Waldner, D.: Optimierung der Spiele und Spalte im Konstruktionsprozess von Flugtriebwerken. Dissertation, Lehrstuhl für Flugantriebe, TU München (2008). ISBN 978-3-89963-581
Walzer, P.: Die Fahrzeug-Gasturbine. VDI-Verlag, Düsseldorf (1991)
Walsh, P.P., Fletcher, P.: Gas Turbine Performance, Blackwell Science, Oxford (lst published 1998, reprinted 2000) (2000)
Walsh, P.P., Fletcher, P.: Gas Turbine Performance. Blackwell Science, Oxford (1998)
Walther, R., Frischbier, J., Selmeier, R.: Aeromechanische Gestaltung fortschrittlicher Triebwerksverdichter. MTU-Technik-Berichte (2001)
Wassel, A.D.: Reynolds number effects in axial compressors. In: ASME Winter Annual Meeting, Pittsburgh, ASME Paper 67WA/GT 2 (1967)
Weigel, A.: Zur aerodynamischen Auslegung mehrstufiger Axialverdichter. Diplomarbeit TU München, Lehrstuhl für Flugantriebe (1982)
Weiß, A.P.: Der Einfluss der Profilgeometrie auf die Entwicklung der Sekundärströmungen in Turbinengittern. Dissertation, Universität der Bundeswehr (1993)
Wennerstrorn, A.J., Puterbaugh, S.L.: A three dimensional model for the prediction of shock losses in compressor blade rows. In: ASME Gas Turbine Conference, Phoenix, Paper 83 GT 216 (1983)
Wiesner, F.J.: A new appraisal of Reynolds number effects on centrifugal compressor performance. In: ASME Gas Turbine Conference, London, Paper 78 GT 149 (1978)
Wilke, I., Kau, H.-P.: CFD-Simulationen von Verdichterstufen mit Casing Treatment. DGLR-JT 2000-102, DGLR Jahrestagung, Leipzig (2000)
Wilke, I., Kau, H.-P.: A Numerical Investigation of the Flow Mechanisms in a HPC Front Stage with Axial Slots. ASME GT-2003-38481 (2004)
Wilke, I.: Verdichterstabilisierung mit passiven Gehäusestrukturen. Dissertation, TU München (2005)
Wilke, I., Kau, H.-P., Brignole, G.: Numerically Aided Design of a High-Efficient Casing Treatment for a Transonic Compressor. ASME Paper GT2005-6 8993 (2005)
Wilfert, G., Sieber, G., Rolt, A., Baker, N., Touyeras, A., Colantuoni, S.: New Environmental Friendly Aero Engine Core Concepts. ISABE Paper ISABE-2007-1120 (2007)
Wilde, G.l.: The design and performance of high temperature turbines in turbofan engines. Aeronaut J. (1977)
Willard, C.M. et al.: Static Performance of Vectoring/Reversing Nonaxisymmetric NozzIes, AIA-A 77-840. AIAA/SAE 13th Propulsion Conference, Orlando (1977)
Wisler, D.C.: Core Compressor Exit Stage Study. NASA lewis research center, Contract NAS3 20070 (1980)
Wisler, D.C., Bauer, R.C., Okiishi, T.H.: Secondary flow, turbulent diffusion, and mixing in axial flow compressors. In: ASME Gas Turbine Conference, Anaheim, Paper 87 GT 16 (1987)
Wu, C.H.: A General Theory of Three Dimensional Flow in Subsonic and Supersonic Turbomachines of Axial, Radial and Mixed Flow Types. NACA Technical Note TN 2604 (1952)
Wu, C.H.: A general theory of three dimensional flow in subsonic and supersonic turbomachines of axial, radial, and mixed flow types. In: ASME Conference, NY, Paper 50 A 79 (1950)
Ziegler, K.U.: Experimentelle Untersuchung der Laufrad Diffusor Interaktion in einem Radialverdichter variabler Geometrie. Dissertation, RWTH Aachen (2003)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Rick, H. (2013). Turbomaschinen-Komponenten. In: Gasturbinen und Flugantriebe. VDI-Buch. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-79446-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-540-79446-2_4
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-540-79445-5
Online ISBN: 978-3-540-79446-2
eBook Packages: Computer Science and Engineering (German Language)