Zusammenfassung
Wassertropfen in der Ansaugluft von Verdichtern können unterschiedliche Ursachen haben. Einerseits kann eine wasserbeladene Strömung aufgrund von Wetterbedingungen, wie Regen und Schnee entstehen. Unterkühlte Wassertröpfchen können unter Reiseflugbedingungen zu plötzlicher Vereisung führen. Durch Vulkanausbrüche können aber auch Partikel bis in hohe Flughöhen gelangen, die die Verdichterbeschaufelung schädigen können. Andererseits wird zur Leistungserhöhung einer Gasturbine bzw. zur Reduktion der Verdichterarbeit bei Industriekompressoren Wasser in den Einlauf eingedüst. Die Wassereindüsung kann aber auch durch Verdichterwaschen erfolgen oder aber unter bestimmten Temperaturen durch Auskondensieren der Luftfeuchte. Die dabei entstehenden Wassertröpfchen können unter bestimmten Umgebungsbedingungen, die bei 60 % relativer Luftfeuchte durchaus bei Temperaturen um 15 °C liegen, zu Eisablagerungen an der Verdichterbeschaufelung führen.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Bhargava RK, Meher-Homji CB, Chaker MA, Bianchi M, Melino F, Peretto A (2005) Fogging technology: a state-of-the-art review, part I: inlet evaporative fogging analytical and experimental aspects. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 4: Turbo Expo 2005, paper GT2005-68336, Reno, Nevada, USA, 6–9 June
Bhargava RK, Meher-Homji CB, Chaker MA, Bianchi M, Melino F, Peretto A (2005) Fogging technology: a state-of-the-art review, part II: overspray fogging analytical and experimental aspects. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 4: Turbo Expo 2005, paper GT2005-68337, Reno, Nevada, USA, 6–9 June
Bhargava RK, Meher-Homji CB, Chaker MA, Bianchi M, Melino F, Peretto A (2005) Fogging technology: a state-of-the-art review, part III: inlet evaporative fogging analytical and experimental aspects. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 4: Turbo Expo 2005, paper GT2005-69144, Reno, Nevada, USA, 6–9 June
Hill JP (1963) Aerodynamic and thermodynamic effects on coolant injection on axial compressors. Aeronaut Q 14:331–348
Zheng Q, Li M, Sun Y (2003a) Thermodynamic performance of wet compression and regenerative gas turbine. In: Proceedings of ASME Turbo Expo 2003, collocated with the 2003 international joint power generation conference, Bd 2: Turbo Expo 2003, paper GT2003-38517, Atlanta, Georgia, USA, 16–19 June
Günther C (2019) Wet compression – considering non-equilibrium thermodynamics. Dissertation, Helmut-Schmidt-Universität, Hamburg
White AJ, Meacock AJ (2004) An evaluation of the effects of water injection on compressor performance. ASME J Eng Gas Turbine Power 126(4):748–754
Horlock JH (2001) Compressor performance with water injection. In: Proceedings of ASME Turbo Expo 2001: power for land, sea, and air, Bd 1: aircraft engine; marine; turbomachinery; microturbines and small turbomachinery, paper 2001-GT-0343, New Orleans, Louisiana, USA, 4–7 June
Härtel C, Pfeiffer P (2003) Model analysis of high-fogging effects on the work of compression. In: ASME Turbo Expo 2003, collocated with the 2003 international joint power generation conference, Bd 2: Turbo Expo 2003, paper GT2003-38117, Atlanta, Georgia, USA, 16–19 June
Zheng Q, Sun Y, Li S, Wang Y (2003) Thermodynamic analysis of wet compression process in the compressor of gas turbine. ASME J Turbomach 125(3):489–496
Baehr HD, Kabelac S (2016) Thermodynamik – Grundlagen und technische Anwendungen, 16. aktualisierte Aufl. Springer Vieweg, Berlin
VDI Verein Deutscher Ingenieure (2003) VDI 4670, Thermodynamische Stoffwerte von feuchter Luft und Verbrennungsgasen. Beuth, Berlin
IAPWS The international Association for the Properties of Water and Steam (1997) Revised release on the IAPWS industrial formulation 1997 for the thermodynamic properties of water and steam. Lucerne, Switzerland
Kretzschmar H-J, Stöcker I, Hellriegel T, Kleemann L, Seibt D (2002) Berechnung der thermophysikalischen Eigenschaften von trockener und feuchter Luft unter Druck. Erhältlich unter: http://thermodynamik.hszigr.de/cmsfg/_data/Ver_ff_Druckluft_Kretzschmar_2002.pdf
Lemmon EW, Jacobsen RT, Penoncello SG, Friend DG (2000) Thermodynamic properties of air and mixtures of nitrogen, argon and oxygen from 60 to 2000 K at pressures to 2000 MPa. J Phys Chem Ref Data Bd. 3(Data 29, Nr. 2):331–385
Hermann S, Kretzschmar H-J, Teske V, Vogel E, Ulbig P, Span R, Gatley DP (2009) Berechnung der thermodynamischen Zustandsgrößen und Transporteigenschaften von feuchter Luft für energietechnische Prozessmodellierungen. Braunschweig, ISBN 978-3-86509-917-4
Prandtl L, Oswatitsch K, Wieghardt K, Dettmering W, Küchemann D, Ludwieg H, Rotta J, Schneider W, Sündermann J, Wippermann F (Hrsg) (1990) Führer durch die Strömungslehre, 9. verbesserte und überarbeitete Aufl. Vieweg, Braunschweig
Dring RP, Caspar JR, Suo M (1979) Particle trajectories in turbine cascades. J Energy 3(3):161–166
Dring RP (1982) Sizing criteria for laser anemometry particles. ASME J Fluid Eng 104(1):15–17
Ruck B (1990) Einfluss der Tracerteilchengröße auf die Signalinformation in der Laser-Doppler-Anemometrie. Tech Mess 57:284–295
Mei R (1996) Velocity fidelity of flow transfer particles. Exp Fluids 22(1):1–13
Melling A (1997) Transfer particles and seeding for particle image velocimetry. Meas Sci Technol 8(12):1406–1416
Crowe C, Sommerfeld M, Tsuji Y (1997) Multiphase flows with droplets and particles. CRC Press, Boca Raton
Lefebvre AH (1989) Atomisation and sprays, Combustion, 1. Aufl. Taylor & Francis, London
Savic S, Mitsis G, Härtel C, Khaidarov S, Pfeiffer P (2002) Spray interaction and droplet coalescence in turbulent air-flow. An experimental study with application to gas turbine high fogging. In: Proceedings of ILASS-Europe 2002, Zaragoza, Spain
Chaker MA, Meher-Homji CB, Mee T III (2004) Inlet fogging of gas turbine engines – part i: fog droplet thermodynamics, heat transfer and practical considerations. ASME J Eng Gas Turbine Power 126(3):545–558
Mitsis G, Savic S (2004) Interaction of neighbouring high fogging sprays: influence of nozzle placement and air velocity on droplet coalescence. In: Proceedings of ILASS-Europe 2004, Nottingham, UK
Chaker MA, Meher-Homji CB, Mee III, T (2002) Inlet fogging of gas turbine engines. Part C: Fog behaviour in inlet duts. CFD analysis and wind tunnel experiments. In: Proceedings of ASME Turbo Expo 2002: power for land, sea, and air, Bd 4: Turbo Expo 2002, parts A and B, paper GT2002-30564, Amsterdam, The Netherlands, 3–6 June
Mitsis G, Savic S (2002) Interaction of neighbouring high fogging sprays: Influence of nozzle placement and air velocity on droplet coalescence. In: Procedings of 19th annual meeting of the ILASS, Nottingham, UK
Chaker MA (2005) Key parameter for the performance of impaction Pin Nozzles used in inlet fogging of gas turbine engines. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 4: Turbo Expo 2005, paper GT2005-68346, Reno, Nevada, USA, 6–9 June
Pilch M, Erdmann CA (1987) Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid drop. Int J Multiphase Flow 13(6):741–757
Schmelz F (2002) Tropfenzerfall in beschleunigten Strömungen. Dissertation, Universität Dortmund
Matysiak A (2007) Euler-Lagrange Verfahren zur Simulation tropfenbeladener Strömung in einem Verdichtergitter. Dissertation, Helmut-Schmidt-Universität Universität der Bundeswehr Hamburg
Ulrichs E (2007) Experimental investigations into the behaviour and influence of water droplets in a compressor cascade flow. Dissertation, Helmut-Schmidt-Universität Universität der Bundeswehr Hamburg
Tabakoff W (1984) Review – turbomachinery performance deterioration exposed to solid particulates environment. ASME J Fluid Eng 106(2):125–134
Tabakoff W, Hussein F (1971) Pressure distribution on blades in cascade nozzle for particulate flow. J Aircr 8(9)
Tabakoff W, Balan C (1981) Effects of solid particles suspended in fluid flow through an axial flow compressor. In: Proceedings of the fifth international symposium on airbreathing engines, Bangalore, India
Joos F (2006) Technische Verbrennung. Springer, Berlin/Heidelberg/New York
Neupert N (2017) Experimentelle Untersuchung einer tropfenbeladenen Strömung in einer ebenen Verdichterkaskade. Dissertation, Helmut-Schmidt-Universität Universität der Bundeswehr Hamburg
Gooma H (2014) Modeling of Liquid Dynamics in Spray Laden Compressor Flows. PhD Thesis, Universität Stuttgart
Clift R, Grace JR, Weber ME (1978) Bubbles, drops and particles. Academic Press, New York
White FM (1991) Viscous fluid flow, 2. Aufl. McGraw-Hill, New York
Spedding P, Hand N (1997) Prediction in stratified gas-liquid co-current flow in horizontal pipelines. Int J Heat Mass Transf 40(8):1923–1935
Clift R, Gauvin WH (1970) On the motion of particles in turbulent gas streams. Proc Chemea 1:14–28
Saffman PG (1962) On the stability of laminar flow of a dusty gas. J Fluid Mech 13(1):120–128
Samenfink W, Elsäßer A, Dullenkopf S, Wittig S (1999) Droplet interaction with shear-driven liquid films: analysis of deposition and secondary droplet characteristics. Int J Heat Fluid Flow 20(5):462–469
Ashgriz N (2011) Handbook of atomization and sprays. Theory and applications, 1. Aufl. Springer, New York
Schiller L, Naumann AZ (1933) Über die grundlegende Berechnung bei der Schwerkraftausbreitung. Zeitschrift des Vereins Deutscher Ingenieure 77:318–320
Happel J, Brenner H (1973) Low Reynolds number hydrodynamics, 2. Aufl. Noordhoff, Leyden
Hadamard JS (1911) Mouvement permanent lent d’une sphere liquid et visquese dans une liquid visquese. CR Acad Sci 152:1735–1738
Rybzynski W (1911) Über die fortschreitende Bewegung einer flüssigen Kugel in einem zähen Medium. Acad Sci Cracovie A:40
Wen CY, Yu YH (1966) Mechanics of fluidization. Chem Eng Prog Symp Ser 62:100
Richardson JF, Zaki WN (1954) Sedimentation and fluidization – part 1. Chem Eng Trans Inst Chem Eng 32:35–53
Di Felice R (1994) The voidade function for fluid-particle interaction systems. Int J Multiphase Flow 20(1):153–159
Basset AB (1961) A treatise on hydrodynamics, 2. Aufl. Dover, New York
Boussinesq J (1885) Sur la résistance qu’oppose un liquid indéfini en repos, sans pesanteur, au movement varié une sphere solide qu’il mouille sur toute sa surface, quand les vitesses restent bien continues et assez faibles pour que leurs carrés et produits soient négligeables. CR Acad Sci 100:935
Oseen CW (1961) Hydromechanik. Akademische Verlagsgesellschaft, Leipzig
Hjemfeldt AT, Mockros LF (1966) Motion of discrete particles in a turbulent fluid. Appl Sci Res 16(1):149–161
Saffman PG (1965) The lift an a small sphere in a low shear flow. J Fluid Mech 22(2):385–400
McLaughlin JB (1991) Inertial migration of small spere in linear shear flows. J Fluid Mech 224:261–274
Rubinov SI, Keller JB (1961) The transverse force on spinning sphere moving in a viscous fluid. J Fluid Mech 11(3):447–459
Tanaka T, Yamagata K, Tsuji Y (1990) Experiment on fluid forces on a rotating sphere and spheroid. Proc Sec KSME-JSME Fluids Eng Conf 1:366
Maccoll JW (1928) Aerodynamics of s spinning sphere. J Roy Aero Soc 32:777
Davis JM (1994) The aerodynamics of golf balls. J Appl Phys 20(9):821
Oertel H (2008) Prandtl – Führer durch die Strömungslehre: Grundlagen und Phänomene, 12. Aufl. Vieweg + Teubner, Wiesbaden
Neve RS, Shansonga T (1989) The effects of turbulence and surface roughness on the drag of spheres in thin jets. Int J Heat Fluid Flow 10:318–321
Horner SF (1992) Fluid-dynamic drag. Published by author, Midland Park
Torobin LB, Gauvin WH (1961) The drag coefficients of single spheres moving in steady and accelerated motion in a turbulent fluid. AICHE J 7(4):615–619
Eaton JK, Fessler JR (1994) Preferential concentration of particels by turbulence. Int J Multiphase Flow 20(1):169–209
Gore RA, Crowe T (1989) Effect of particle size on modulating turbulence intensity. Int J Multiphase Flow 15(2):279–285
Yarin LP, Hetsroni G (2004) Combustion of two-phase reactive media. Springer, Berlin
Yarin LP, Hetsroni G (1994) Turbulence intensity in dilute two-phase flows – 1. effect of particle size distribution on the turbulence of the carrier fluid. Int J Multiphase Flow 20(1):1–15
Brennen CE (2005) Fundamentals of multphase flow. Cambride University Press, Cambridge, UK/New York
O’Rouke PJ, Amsden AA (1987) The tab method for numerical calculation of spray droplet breakup. Conference paper, SAE-paper 872089, 1987 SAE international fall fuels and lubricants meeting and exhibition
Schmehl R (2004) Tropfendeformation und Nachzerfall bei der technischen Gemischaufbereitung. Dissertation, Universität Karlsruhe
Hsiang LP, Faeth GM (1995) Drop deformation and breakup due to shock wave and steady disturbances. Int J Multiphase Flow 21(4):545–560
Schmehl R (2002) Advanced modelling of droplet deformation and breakup for cfd analysis of mixture preparation. ILASS-Europe, Saragossa, Spain, 9–11 September
Chou WH, Faeth GM (1998) Temporal properties of secondary drop breakup in the bag breakup regime. Int J Multiphase Flow 24(6):889–912
Rimbert N, Casternet G (2011) Crossover between Rayleigh-taylor instability and turbulent cascading atomization mechanism in the bag-breakup regime. Phys Rev E 84:016318
Liu Z, Reitz RD (1997) An analysis of the distortion and breakup mechanisms of high speed liquid drops. Int J Multiphase Flow 23(4):631–650
Khosla S, Smith CE, Throckmorton RP (2006) Detailed understanding of drop atomization by gas crossflow using the Bd of fluid method. In: Proceedings 19th ILASS Americas, Toronto, Canada, May 2006
Hsiang LP, Faeth GM (1992) Near-limit drop deformation and secondary breakup. Int J Multiphase Flow 18(5):635–652
Hamed A, Tabakoff W, Wenglarz R (2006) Erosion and deposition in turbomachinery. J Propuls Power 22(2):350–360
Yarin AL (2006) Drop impact dynamics: splashing, spreading, receding, bouncing. Annu Rev Fluid Mech 38(1):159–192
Cossali GE, Santini M, Marengo M (2005) Single-drop empirical models for spray impact on solid walls: a review. Atomiz Spray 15(6):699–736
Mundo C, Sommerfeld MM, Tropea C (1998) On the modelling of liquid sprays impinging on surfaces. Atomiz Spray 8(6):625–652
Mishra NK, Zhang Y, Ratner A (2011) Effect of chamber pressure on spreading and splashing of liquid drops upon impact on a dry smooth stationary surface. Exp Fluids 51(2):483–491
Xu L, Zhang WW, Nagel SR (2005) Drop splashing on a dry smooth surface. Phys Rev Lett 94(18):184505
Xu L, Barcos L, Nagel SR (2007) Splashing of liquids: interplay of surface roughness with surrounding gas. Phys Rev E 76:066311
Li H (2013) Drop impact on dry surfaces with phase change. Dissertation, Technische Universität Darmstadt
Rioboo R, Marengo M, Tropea C (2002) Time evolution of liquid drop impact onto solid, dry surfaces. Exp Fluids 33(1):112–124
Vadillo DC, Soucemarianadin A, Delattre C, Roux CD (2009) Dynamic contact angle effects onto the maximum drop impact spreading on solid surfaces. Phys Fluids 21:12002-1-8
Pasandideh-Fard M, Qiao YM, Chandra S, Mostaghimi J (1996) Capillary effects during droplet impact on a solid surface. Phys Fluid 8(3):650–659
Rioboo R, Bauthier C, Conti J, Voue M, de Coninck J (2003) Experimental investigation of splash and crown formation during single drop impact wetted surfaces. Exp Fluids 35(6):648–652
Mundo C (2012) Zur Sekundärzerstäubung newtonischer Fluide an Oberflächen. PhD Thesis, Universität Erlangen-Nürnberg
Cossali GE (1997) The impact of a single drop on a wetted solid surface. Exp Fluids 22(6):463–472
Levin Z, Hobbs PV (1971) Splashing of water drops on solid and wetted surfaces: hydrodynamics and charge separation. Philos Trans R Soc Lond A 269(1200):555–585
Urban J (2009) Numerische Untersuchung und Modellierung von Tropfen-Wand-Interaktionen. PhD thesis, Universität Stuttgart
Bird JC, Tsai SS, Stone HA (2009) Inclined to splash: triggering and inhibiting a splash with tangential velocity. New J Phys 11:063017
Roisman IV, Horvat K, Tropea C (2006) Spray impact: rim transverse instability initiating fingering and splash, and description of a secondary spray. Phys Fluids 18(10):102104
Barnes HA, Hardalupas Y, Taylor AMKP, Wilkins JH (1999) An investigation of the interaction between two adjacent droplets. Conference paper, ILASS-Europe 1999, Toulouse, Frankreich, 15–17 July
Cossali GE, Santini M, Marengo M (2004) Impact of single and multiple drop array on aliquid film. Conference paper, ILASS-Europe 2004, Nottingham, England, 6–9 September
Roisman IV, Tropea C (2005) Fluctuating flow in a liquid layer and secondary spray created by an impacting spray. Int J Multiphase Flow 31(2):179–200
Matz C, Kappis W, Cataldi G, Mundinger G, Bischoff S, Helland E, Ripken M (2010) Prediction of evaporative effects within the blading of an industrial axial compressor. ASME J Turbomach 132(4):041013
Samenfink W (1997) Grundlegende Untersuchung zur Tropfeninteraktion mit schubspannungsgetriebenen Wandfilmen. PhD thesis, Universität Karlsruhe
Rein M (2002) Drop-surface interactions. CISM International Centre for Mechanical Sciences. Springer, Wien
Budakli M (2015) Hydrodynamics and heat transfer in gas-driven liquid film flows. PhD thesis, Technische Universität Darmstadt
Hu C-C (2009) Mechanistic modeling of evaporating thin liquid film instability on a BWR fuel rod with parallel and cross vapor flow. PhD thesis, Georgia Tech. Copyright – Copyright ProQuest, UMI Dissertations Publishing 2009; zuletzt aktualisiert – 2015-08-23; Erste Seite – n/a
Schober P (2009) Berührungsfreie Erfassung beschleunigter schubspannungsgetriebener Kraftstoffwandfilme unter Druckeinfluss. PhD thesis, Universität Karlsruhe (TH)
Hammitt FG (1981) Liquid film and droplet stability consideration as applied to wet steam flow. Forsch Ingenieurwes 47(1):1–14
aus der Wiesche S, Joos F (2018) Handbuch Dampfturbinen, Grundlagen, Konstruktion, Betrieb. Springer Vieweg, Wiesbaden
Yellot J, Holland C (1937) The condensation of flowing stream: condensation in diverging nozzles. Engineering 143:647
Haller B, Unsworth R, Walters P, Lord M (1989) Wetness measurements in a model multistage low pressure steam turbine. Technology of turbine plant operating with wet steam. In: 20, Proceedings of an international conference held in London on 11–13 October 1988, British Nuclear Energy Society, London (UK); Institution of Mechanical Engineers, London (UK); European Nuclear Society, Petit-Lancy (Switzerland); 240 p; ISBN 0 7277 1395 7; Worldcat; 1989; S 161–169
Joos F (2018) Experimental investigations of droplet laden flow around blade profiles. In: Proceedings 50. Kraftwerkstechnisches Kolloquium Dresden, 23. – 24.10.2018, Dresden
Gyarmathy G (1962) Grundlagen einer Theorie der Nassdampfturbine. PhD thesis, ETH Zürich
Kirillov II, Yablonik RM (1970) Fundamentals of the theory of turbines operating on wet steam (Washington): National Aeronautics and Space Administration; for sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Va., Translation of Osnovy teorii vlazhnoparovykh turbine
Fernandino M, Ytrehus T (2006) Determination of flow sub-regimes in stratified airwater channelflow using ldv spectra. Int J Multiphase Flow 32(4):436–446
Narasimhan TV, Davis EJ (1972) Surface waves and surfactant effects in horizontal stratified gas-liquid flow. Ind Eng Chem Fundam 11(4):490–497
Schober P, Ebner J, Schäfer O, Wittig S (2003) Experimental study on the effect of a strong negative pressure gradient on a shear-driven liquid fuel film. Conference paper, 9th ICLASS conference, Sorrento, Italy, 13–17 July
Hammit W, Blome FG, Hamed S, Kim H (1976) Thin shear driven water film wavelet characteristics. ASME Cavitation and Polyphase Flow Forum 1977
O’Brien SBG, Schwartz LW (2002) Thin film flows: theory and modeling. Chapter 509. Taylor & Francis, London, S 6304–6317
Oron A, Davis SH, Bankoff SG (1997) Long-scale evolution of thin liquid films. Rev Mod Phys 69(3):931–980
Simon A, Marcelet M, Hérard JM, Dorey M, Lance JM (2016) A model for liquid film in steam turbines. In: Proceedings of ASME Turbo Expo 2016: turbomachinery technical conference and exposition, Bd 8: microturbines, turbochargers and small turbomachines; steam turbines, paper GT2016-56148, Seoul, South Korea, 13–17 June
Bertschy J, Chin R, Albernathy F (1983) High-strain-rate-free-surface boundary layer flows. J Fluid Mech 126:443–461
Alekseenko S, Nakoryakov YY, Pokusaev P (1985) Wave formation of a vertical falling liquid film. AICHE J 31(9):1446–1460
Adomeit P, Renz U (2000) Hydrodynamics of three-dimensional waves in laminar falling films. Int J Multiphase Flow 26(7):1183–1208
Kim W, Hammitt FG, Krzecskowski S (1978) Investigation of the behaviour oft hin liquid film with co-occurent steam flow. In: Proc. Two-Phase Flow Heat Transfer Symposium. Workshop. 18–20 October 1976, Ft. Lauderdale, FL 4, S 1213–1230
Williams J, Young JB (2007) Movement of deposits water on turbomachinery rotor blade surfaces. ASME J Turbomach 129(2):394–403
Huh C, Scriven LE (1971) Hydrodynamic model of a steady movement of a solid/liquid/fluid contact line. J Colloid Interface Sci 35(1):85–101
Dussan EB, Ramé V, Garoff S (1991) On identifying the appropriate boundary conditions at moving contact line: an experimental investigation. J Fluid Mech 230:97–116
Hartley DE, Murgatroyd W (1964) Criteria for the break-up of thin liquid layers flowing isothermally over solid surfaces. Int J Heat Mass Transf 7(9):1003–1015
Hobler T (1968) Minimum surface wetting in a centrifugal force field. Chemia Stosow 2(B):265
Bankoff GS (1971) Minimum thickness of a draining liquid film. Int J Heat Mass Transf 14(12):2143–2146
Mikielewicz J, Moszynkski JR (1976) Minimum thickness of a liquid film flowing vertically down a solid surface. Int J Heat Mass Transf 19(2):771–776
Saber HH, El-Genk MS (2004) On the breakup of a thin liquid film subject to interfacial shear. J Fluid Mech 500:113–133
Hastings EC, Weinstein LM (1984) Preliminary indications of water film distribution and thickness on an airfoil in a water spray. NASA Technical Memorandum 85796
Thompson BE, Jang J, Dion JL (1965) Wing performance in moderate rain. J Aircr 32(5):1034–1039
Zhang K (2015) An experimental study of wind-driven surface water transport process pertinent to aircraft icing. PhD thesis, Iowa State University, Ames, Iowa
AGARD AR-334 (1998) Ice accretion simulation. AGARD advisory report 334, Neuilly-Sur-Seine, Frankreich
Marshall J, Ettema R (2004) Contact-line instabilities of driven liquid films: Instability of flows. WIT Trans State Art Sci Eng 6:1–41
Al-Khalil KM, Keith TG, De Witt KJ (1990) Development of an anti-icing runback model. In: Proceedings of 28th aerospace sciences meeting, paper AIAA 90-0759, Reno, Nevada, USA, 8–11 January
Zhang K, Blake J, Rothmayer A, Hu H (2013) An experimental investigation on winddriven rivulet/film flows over a naca0012 airfoil by using digital image projection technique. Conference paper: 52nd aerospace sciences meeting
Craik ADD (1966) Wind-generated waves in thin liquid films. J Fluid Mech 26(2):369–392
Benjamin TB (1957) Wave formation in laminar flow down an inclined plane. J Fluid Mech 2(6):554–575
Kim W (1978) Study of liquid films, fingers and droplet motion for steam turbine blading erosion problem. PhD thesis, University of Michigan
Wurz DE (1978) Subsonic and supersonic gas-liquid film flow. In: Proceedings of 11th fluid and plasma conference, AIAA, Seattle, WA, USA, 10–12 July
Cohen LS, Hanratty TJ (1968) Effects of waves at a gas-liquid interface on turbulent air flow. J Fluid Mech 31(03):467–479
Ebner J (2004) Einfluss von Druckgradienten in der Gasströmung auf die Dynamik schubspannungsgetriebener Wandfilme. PhD thesis, Universität Karlsruhe
Sattelmayer T (1985) Zum Einfluss der ausgebildeten turbulenten Luft-Flüssigkeitsfilm-Strömung auf den Filmzerfall und die Tropfenbildung am Austritt von Spalten geringer Höhe. PhD thesis, Universität Karlsruhe
Himmelsbach J (1992) Zweiphasenströmung mit schubspannungsgetriebenen welligen Flüssigkeitsfilmen in turbulenter Heißluftströmung. PhD thesis, Universität Karlsruhe
Roßkamp H (1998) Simulation von drallbehafteten Zweiphasenströmungen mit schubspannungsgetriebenen Wandfilmen. PhD thesis, Universität Karlsruhe
Ebner J, Gerendas M, Schafer O, Wittig S (2003) Droplet entertainment from shear-driven liquid wall film in inclined ducts: experimental study and correlation comparison. ASME J Eng Gas Turbine Power 124(4):874–880
Ihnatowicz E, Gumkowski S, Mikielewicz J (1979) A model for roll waves in gas-liquid flow. Chem Eng Sci 26(1):1915–1931
Mielke M (2014) Experimentelle Untersuchung am Tropfenherausriss der Saugseite einer Verdichterschaufel. Bachelorarbeit an der Helmut-Schmidt-Universität, Laboratorium für Strömungsmaschinen
Woodmansee DE, Hanratty TJ (1969) Mechanism for removal of droplets from a liquid surface by parallel air flow. Chem Eng Sci 24(2):299–307
van Rossum JJ (1959) Experimental investigation of a horizontal film flow. Chem Eng Sci 11(1):35–52
Marmottant P, Villermaux E (2004) On spray formation. Int J Fluid Mech 498:73–111
Gepperth S, Koch R, Bauer H-J (2013) Analysis and comparison of primary droplet characteristics in the near field of prefilming airblast atomizer. In: Proceedings of ASME Turbo Expo 2013: turbine technical conference and exposition, Bd 1A: combustion, fuels and emissions, paper GT2013-94033, San Antonio, Texas, USA, 3–7 June
Eckel G, Rachner P, Le Clercq M, Aigner M (2013) Semi-empirical primary atomization models for transient lagrangian spray simulation. In: Proceedings of ICMF, 8th international conference on multiphase flow
Gepperth S, Guildenbecher D, Koch R, Bauer H-J (2010) Pre-filming primary atomization: experiments and modeling. In: Proceedings of ILASS-Europe 2010, 23rd annual conference on liquid atomization and spray systems, Brno, Czech Republic, 6–8 September
White FM (1998) Viscous fluid flow. McGraw-Hill, New York; 2. Aufl., 1991. Villermaux E (1998) On the role of viscosity in shear instabilities. Phys Fluid 10(2):368–373
Rayleigh L (1878) On the stabilty of jets. Proc Lond Math Soc 10(1):4–13
Dumouchel C (2008) On the experimental investigation on primary atomization of liquid streams. Exp Fluids 45(3):371–422
Ulrichs E, Joos F (2006) Experimental investigations of the influence of water droplets in compressor cascades. In: Proceedings of ASME Turbo Expo 2006: power for land, sea, and air, Bd 6: turbomachinery, parts A and B, paper GT2006-90411, Barcelona, Spain, 8–11 May
Ober B, Joos F (2012) Experimental investigation on the performance of a compressor airfoil in droplet laden flow. In: Proceedings of ASME Turbo Expo 2012: turbine technical conference and exposition, Bd 8: turbomachinery, parts A, B, and C, paper GT2012-69464, Copenhagen, Denmark, 11–15 June
Ober B, Joos F (2014) Experimental investigation on aerodynamic behavior of a compressor cascade in droplet laden flow. In: Proceedings of ASME Turbo Expo 2013: turbine technical conference and exposition, Bd 6A: turbomachinery, paper GT2013-94731, San Antonio, Texas, USA, 3–7 June, 061014
Neupert N, Harbeck J, Joos F (2017a) An experimentally derived model to predict the water film in a compressor cascade with droplet laden flow. In: Proceedings of ASME Turbo Expo 2017: turbomachinery technical conference and exposition, Bd 2D: turbomachinery, paper GT2017-64121, Charlotte, North Carolina, USA, 26–30 June
Neupert N, Harbeck J, Joos F (2017b) Investigation on the effect of surface wettability on a two-phase flow in a compressor cascade. In: Proceedings of ASME Turbo Expo 2017: turbomachinery technical conference and exposition, Bd 2D: turbomachinery, paper GT2017-64155, Charlotte, North Carolina, USA, 26–30 June
Walsh WS, Thole KA, Joe C (2006) Effects of sand ingestion on the blockage of film-cooling holes. In: Proceedings of ASME Turbo Expo 2006: power for land, sea, and air, Bd 3: heat transfer, parts A and B, paper GT2006-90067, Barcelona, Spain, 8–11 May
Bons JP et al (2007) High pressure turbine deposition in land based gas turbines from various synfuels. ASME J Eng Gas Turbine Power 129(1):135–143
Rathod A, Sapate SG, Khatirkar RK (2012) Shape factor analysis of abrasive particles used in slurry abrasion testing. Int J Mech Indust Engineert 2:2231–6477
Santamarina J, Cho G (2004) Soil behaviour: the role of particle shape. In: Advances in geotechnical engineering: The Skempton conference, March, London
Ghenaiet A, Tan SC, Elder RL (2005) Prediction of an axial turbomachine performance degration due to sand ingestion. Proc Inst Mech Eng Part A 229(4):219–273
Suzuki M, Inaba K, Yamamoto M (2008) Numerical simulation of sand erosion phenomena in rotor/stator interaction of compressor. J Therm Sci 17:125–133
Suzuki M, Inaba K, Yamamoto M (2008) Numerical simulation of sand erosion in a square-section 90-degree bend. J Fluid Sci Technol 3(7):868–880
Suzuki M, Inaba K, Yamamoto M (2010) Numerical simulation of sand erosion phenomena in a single stage axial compressor. ASME/IGTI Turbo Expo June 14–18 2010, Glasgow UK, Paper GT2010-23593
Yang H, Boulanger J (2013) The whole annulus computations of particulate flow and erosion in axial fan. ASME J Turbomach 135(1):20130101
Bons JP (2010) A review of surface roughness effects in gas turbines. ASME J Turbomach 132(2):021004
Dunn MG, Baran AJ, Miatech J (1996) Operation of gas turbine engines in volcanic ash clouds. ASME J Eng Gas Turbine Power 118(4):724–731
Saxena S, Jothiprasad G, Bourassa C, Pritchard B (2016) Numerical simulation of particulates in multi-stage axial compressors. In: Proceedings of ASME Turbo Expo 2016: turbomachinery technical conference and exposition, Bd 2A: turbomachinery, paper GT2016-57917, Seoul, South Korea, 13–17 June
Suman A, Morini M, Aldi N, Casari N, Pinelli M, Spina PR (2017) A compressor fouling review based on an hirostical survey of asme turbo expo papers. ASME J Turbomach 139(4):041005
Casari N, Pinelli M, Suman A (2018b) An innovative approach towards fouling modeling: microsale deposition pattern and ist effect on the flow field. In: Proceedings of ASME Turbo Expo 2018: turbomachinery technical conference and exposition, Bd 2D: turbomachinery, paper GT2018-76882, Oslo, Norway, 11–15 June
Casari N, Pinelli M, Suman A (2018a) On deposition and build-up detachement in compressor fouling. In: Proceedings of ASME Turbo Expo 2018: turbomachinery technical conference and exposition, Bd 2D: turbomachinery, paper GT2018-76776, Oslo, Norway, 11–15 June
Aldi N, Casari N, Dainese D, Morini M, Pinelli M, Spina P, Suman A (2017) The effects of third substances at the particle/surface interface in compressor fouling. In: Proceedings of ASME Turbo Expo 2017: turbomachinery technical conference and exposition, Bd 9: oil and gas applications; supercritical CO2 power cycles; wind energy, paper GT2017-64425, Charlotte, North Carolina, USA, 26–30 June
Soltani M, Ahmadi G (1994) On particle adhesion and removal mechanisms in turbulent flows. J Adhes Sci Technol 8(7):763–785
Poppe T, Blum J, Henning T (2000) Analogous experiments on the stickiness of micron-sized preplanetary dust. Astrophys J 533(1):454
Berbner S, Löffler F (1994) Influence of high temperatures on particle adhesion. Powder Technol 78(3):273–280
Orr F, Scriven L, Rivas AP (1975) Pendular rings between solids: meniscus properties and capillary force. J Fluid Mech 67(04):650–659
Kim TW, Bhushan B (2008) The adhesion model considering capillarity for gecko attachment system. J R Soc Interface 5(20):319–327
Israelachvili JN (2011) Intermolecular and surface forces. Academic Press, Burlington
Visser J (1972) On hamaker constants: A comparison between hamaker constants and lifshitz van der waals constants. Adv Colloid Interf Sci 3(4):331–363
Bowling RA (1988) A theoretical review of particle adhesion. In: Particles on surfaces 1. Springer, Berlin, S 129–142
O’Neill M (1968) A sphere in contact with a plane wall in a slow linear shear flow. Chem Eng Sci 23(11):1293–1298
Fuchs NA (1989) The mechanics of aerosols. Dover Publications, New York
Wen CY, Yu YH (2014) Reducing solid particle erosion of an axial fan with sweep and lean using multidisciplinary design optimization. Proc Inst Mech Eng Part A 228(14):2584–2603
Khan JR, Wang T (2011) Three-dimensional modeling for wet compression in a single stage compressor including liquid particle erosion analysis. ASME J Eng Gas Turbine Power 133(1):12001
Verstraete T, Alsalihi Z, Van den Braembussche RA (2010) Multidisciplinary optimization of a radial compressor for microgas turbine applications. ASME J Turbomach 132(3):31004
Hamed A, Tabakoff W, Rivir RB (2005) Turbine blade deterioration by erosion. ASME J Turbomach 127(3):445–452
Wang SS, Mao JR, Liu GW (2010) Reduction of solid particle erosion on the control-stage nozzle of a steam turbine through improved end-wall contouring. Proc Inst Mech Eng C J Mech Eng Sci 224:2199
Corsini A, Marchegiani A, Rispoli F (2012) Predicting blade leading edge erosion in an axial induded draft fan. J Eng Gas Turbines Power 134(4):42601
Haider A, Levenspiel O (1989) Drag coefficient and terminal velocity of spherical and nonspherical particles. Powder Technol 58(1):63–70
Gosman AD, Ioannides E (1983) Aspects of computer simulation of liquid-fueled combustors. J Energy 7(6):482–490
Tabakoff W, Grant G, Ball R (1974) An experimental investigation of certain aerodynamic effects on erosion. In: Proceedings of 8th aeorodynamic testing conference, AIAA paper no. 74-639. Bethesda, MD, USA, 8–10 July
Day I (2005) Rain ingestion in axial flow compressors at part speed. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 6: Turbo Expo 2005, parts A and B, paper GT2005-68582, Reno, Nevada, USA, 6–9 June
Ansys C (2010) Ansys CFS-solver theory guide. Ansys, Caninsburg PA
Liu Z, Zhang F, Liu Z (2018) A numerical model for simulating liquid particles deposition on surface. In: Proceedings of ASME Turbo Expo 2018: turbomachinery technical conference and exposition, Bd 2D: turbomachinery, paper GT2018-76002, Oslo, Norway, 11–15 June
Suman A, Casari N, Fabbri E, Pinelli M, di Mare L, Montomoli F (2018) Gas turbine fouling tests: review, critical analysis and particle impact behaviour map. In: ASME Turbo Expo 2018: turbomachinery technical conference and exposition, Bd 2D: turbomachinery, paper GT2018-76934, Oslo, Norway, 11–15 June
Day I, Williams J, Freeman C (2005) Rain ingestion in axial flow compressors at part speed. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 6: Turbo Expo 2005, parts A and B, paper GT2005-68582, Reno, Nevada, USA, 6–9 June
AGARD AR-332 (1995) Recommendes practices for the assessment of the effects of atmospheric water ingestion on the performance and operability of gas turbine engines. AGARD Advisory Report No. 332
JAA (1997) Ingestion of rain and hail, hamonised changes to JAR-E and FAR Part 33. Technical report, Joint Aviation Authorities
Kissel GJ (1980) Rain and hail extremes at altitude. J Aircr 17(7):464–467
Riley S (1997) Whole engine water/ice ingestion strategy – final report. Technical report, Rolls-Royce plc
Mason J, Strapp J, Chow P (2006) The ice particle threat to engines in flight. In: Proceedings of the 44th AIAA aerospace sciences meeting and exhibit, Reno, NV, 9–12 January
Mason J, Grzych ML, Chow P (2009) Current perspectives on jet engine power loss in ice crystal conditions: Engine icing. AIAA Atmospheric and Space Environments, San Antonio, TX, June
Sun L, Zheng Q, Li Y, Luo M, Wang I, Bhargava RK (2012) Numerical through flow simulation of a gas turbine engine with wet compression. In: Proceedings of ASME Turbo Expo 2012: turbine technical conference and exposition, Bd 3: cycle innovations; education; electric power; fans and blowers; industrial and cogeneration, paper GT2012-68846, Copenhagen, Denmark, 11–15 June
Sun L, Zheng Q, Li Y, Luo M, Wang I, Bhargava RK (2012) On the behavior of water droplets when moving onto blade surface in a wet compression transonic compressor. J Eng Gas Turbines Power 133(8):082001-1-10
Saxena S, Woo GTK, Singh R, Breeze-Stringfellow A, Nakano T, Szcucs P (2016) Effect of ice and blade interaction models on compressor stability. In: Proceedings of ASME Turbo Expo 2016: turbomachinery technical conference and exposition, Bd 2A: turbomachinery, paper GT2016-57797, Seoul, South Korea, 13–17 June
Jorgensen P, Veres J, Whright W, May R (2011) Engine icing modeling and simulation (part i): ice crystal accretion on compression system components and modeling its effect on engine performance. SAE Technical Paper 2011-38-0025
Mazzaway R (2007) Modeling of ice accretion and shedding in turbofan engines with mixed phase/glaciated (ice crystal) conditions. Conference paper: 2007 SAE aircraft and engine icing international conference aircraft and engine icing international conference. SAE, Seville, 2007-01-3288
Veillard X, Habashi WG, Aube MS, Baruzzi GS (2009) Fensap-ice: ice accretion in multi-stage jet engines. In: Proceedings of the 19th AIAA computational fluid dynamics conference, AIAA Paper 2009-4158; San Antonio, Texas, AIAA 2009-4158
May R, Guo T-H, Veres J, Jorgensen P (2011) Engine icing modeling and simulation (part 2): performance simulation of engine rollback phenomena. In: SAE international conference on aircraft and engine icing and ground deicing, 2011-38-0026
Day I, Williams J, Freeman C (2008) Rain ingestion in axial flow compressors at part speed. ASME J Turbomac 130(1):011024
Califf C, Knezevici D (2014) Use of a turbofan engine to measure ice crystal cloud concentration inflight. In: Proceedings of the 50th AIAA/ASME/SAE/ASEE joint propulsion conference, paper, AIAA-2014-3843, Cleveland, OH, USA, 28–30 July
Saxena S, Singh R, Breeze-Stringfellow A, Nakano T (2015) Transient behavior in axial compressors in event of ice shed. In: Proceedings of ASME Turbo Expo 2015: turbine technical conference and exposition, Bd 2A: turbomachinery, paper GT2015-42413, Montreal, Quebec, Canada, 15–19 June
Kundu R, Prasad J, Saxena S, Singh R, Breeze-Stringfellow A, Nakano T (2014) Analysis of stall onset in a multistage axial flow compressor in response to engine icing. In: Proceedings of the 50th AIAA/ASME/SAE/ASEE joint propulsion conference, paper, AIAA-2014-3841, Cleveland, OH, USA, 28–30 July
Saxena S, Jotiphrasad G, Pritchard B (2016a) Numerical simulation of particulates in multi-stage axial compressors. In: Proceedings of ASME Turbo Expo 2016: turbomachinery technical conference and exposition, Bd 2A: turbomachinery, paper GT2016-57917, Seoul, South Korea, 13–17 June
Mason J, Chow P, Fuleki D (2010) Understanding ice crystal accretion and shedding phenomenon in jet engines using a rig test. ASME J Eng Gas Turbine Power 133(4):41201
Daggett DL (2007) Water injection-could it reduce airplane maintenance costs and airport emissions? (NASA/TM-2007-213652) Boeing Commercial Airplane Group, Seattle, Washington, March 2007
Daggett DL (2005) Water injection feasibility for Boeing 747 Aircraft (NASA/CR-2005-213656) Boeing Commercial Airplane Group, Seattle, Washinton, December 2005
Daggett DL (2004) Water misting and injection of commercial aircraft engines to reduce airport NOx, NASA/CR-2004-212957
Kleinschmidt RV (1947) Value of wet compression in gas-turbine cycles. Mech Eng (Am Soc Mech Eng) 69(2):115–116
Bhargava RK, Meher-Homjii CB, Bianchi M, Melino F, Peretto A, Igistov S (2007) Gas turbine fogging technology – a state-of-the-art review: part I – Inlet evaporative fogging, analytical and experimental aspects. ASME J Eng Gas Turbine Power 129(2):443–453
Bhargava RK, Meher-Homjii CB, Chaker MA, Bianchi M, Melino F, Peretto A, Ingistov S (2007) Gas turbine fogging technology: a state-of-the-art review: part II: overspray fogging-analytical and experimental aspects. ASME J Eng Gas Turbine Power 129(2):454–460
Bhargava RK, Meher-Homjii CB, Chaker MA, Bianchi M, Melino F, Peretto A, Ingistov S (2007) Gas turbine fogging technology: a state-of-the-art review: part III: practical considerations and operational experience. ASME J Eng Gas Turbine Power 129(2):461–472
Kakaras E, Doukelis A, Prelipceanu A, Karellas S (2004) Inlet air cooling methods for gas turbine based power plants. In: Proceedings of ASME Turbo Expo 2004: power for land, sea, and air, Bd 5: Turbo Expo 2004, parts A and B, paper GT2004-53765, Vienna, Austria, 14–17 June
Lechner C, Seume J (2010) Stationäre Gasturbinen, 2. neu bearbeitete Aufl. Springer-Verlag, Heidelberg
Levy Y, Sherbaum V, Ovcharenko V, Sotseno Y (2005) Low pressure fogger system for power augmentation of industrial gas turbine. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 5: Turbo Expo 2005, paper GT2005-68320, Reno, Nevada, USA, 6–9 June
Bhargava R, Meher-Homjii CB (2002) Parametric analysis of existing gas turbines with inlet evaporative and overspray fogging. In: Proceedings of ASME Turbo Expo 2002: power for land, sea, and air, Bd 4: Turbo Expo 2002, parts A and B, paper GT2002-30560, Amsterdam, The Netherlands, 3–6 June
Zurigat YH, Dawoud B, Al-Bortmany JN, Al-Shihabi ST (2004) Technical and economical feasibility of gas turbine inlet cooling using evaporative fogging system in two different locations in Oman. In: Proceedings of ASME Turbo Expo 2004: power for land, sea, and air, Bd 4: Turbo Expo 2004, paper GT2004-53122, Vienna, Austria, 14–17 June
Meher-Homjii CB, Mee III, TR (1999) Gas turbine power augmentation by fogging of Inlet air. In: Proceedings oft he 28th turbomachinery symposium, Houston, Texas, USA, S 93–113
Craig Cortes PE, Daniel, W (2003) Gas turbine air cooling techniques: an overview of current technologie. SIEMENS – WESTINGHOUSE; PowerGEN 2003, Las Vegas, Nevada
Tawney R, Pearson C, Brown M (2001) Options to maximize power output for merchant plants in combined cycle applications. In: Proceedings of ASME Turbo Expo 2001: power for land, sea, and air, Bd 3: heat transfer; electric power; industrial and cogeneration, paper 2001-GT-0409, New Orleans, Louisiana, USA, 4–7 June
Sexton WR, Sexton MR (2003) The effects of wet compression on gas turbine engine operating performance. In: Proceedings of ASME Turbo Expo 2003, collocated with the 2003 international joint power generation conference, Bd 2: Turbo Expo 2003, paper GT2003-38045, Atlanta, Georgia, USA, 16–19 June
Li M, Zheng Q (2004) Wet compression system stability analysis: part I – wet compression moore greitzer transient model. In: Proceedings of ASME Turbo Expo 2004: power for land, sea, and air, Bd 4: Turbo Expo 2004, paper GT2004-54018; and part II: simulations and bifucation analyses, paper GT2004-54020, Vienna, Austria, 14–17 June
Savic SM, Rostek KE, Klaesson DK (2005) Techno-economic evaluation of commercially available high-fogging systems. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 4: Turbo Expo 2005, paper GT2005-68368, Reno, Nevada, USA, 6–9 June
Deneve M, De Tandt B, Comelis N, Bultereys C, Gijbels S (2005) Results of the first application of the Swirl-FlashTM wet compression system on a 150 MW heavy-duty gas turbine. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 4: Turbo Expo 2005, paper GT2005-68726, Reno, Nevada, USA, 6–9 June
Mathioudakis K (2002) Analysis of the effects of water injection on the performance of a gas turbine. ASME J Eng Gas Turbine Power 124(3):489–495
Chiang H-WD, Wang P-Y, Li H-L (2008) Power augmentation study of an existing combined cycle power plant by overspray inlet fogging. In: Proceedings of ASME Turbo Expo 2008: power for land, sea, and air, Bd 2: controls, diagnostics and instrumentation; cycle innovations; electric power, paper GT2008-50058, Berlin, Germany, 9–13 June
Utumara M, Takehara I, Horii N, Kuwahara T (1997) A new gas turbine cycle for economical power boosting. In: Proceedings of ASME 1997 turbo asia conference, paper Bde. 97-AA-142, Singapore, September 30–October 2
Eisfeld T, Joos F (2012) On thermodynamic modeling of two-phase flow phenomena in transonic compressor cascades. In: Proceedings of ASME Turbo Expo 2009: power for land, sea, and air, Bd 7: turbomachinery, parts A and B, paper GT2009-59365, Orlando, Florida, USA, 8–12 June
Kefalas E, Barabas B, Schnitzler JP, Benra K-F, Dohmen HJ (2012a) Water droplet evaporation at high pressure and temperature levels: part i: experimental investigations of the spray pattern in dependence on paramter variation. In Proceedings of HEFAT2012, 9th international conference on heat transfer, fluid mechanics and thermodynamics, Malta
Kefalas A, Schnitzler JP, Barabas B, Benra F-K, Dohmen H-J (2012b) Experimentelle Unterschungen zum Verdampfungsprozess von Wassertropfen bei hohen Druck- und Temperaturniveaus. Fachtagung „Lasermethoden in der Strömungsmesstechnik“, Rostock
Eisfeld T (2011) Experimentelle Untersuchung der Aerodynamik einer mit Wassertropfen beladenen Luftströmung in einem ebenen Verdichtergitter. Dissertation Helmut-Schmidt-Universität, Universität der Bundeswehr Hamburg
Traupel W (2001) Thermische Turbomaschinen. Klassiker der Technik, 4. Aufl. Springer, Berlin
Wagner W, Pruss A (1993) International equations for the saturation properties of ordinary water substance. Revised according to the international temperature scale of 1990. J Phys Chem Ref Data 22(3):783–787
Wagner W, Pruss A (2002) The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use. J Phys Chem Ref Data 31(2):387–535. https://doi.org/10.1063/1.1461829
Miller RS, Harstad K, Bellan J (1998) Evaluation of equilibrium and non-equilibrium evaporation models for many droplet gas-liquid flow simulations. Int J Multiphase Flow 24(6):1025–1055
White AJ, Meacock AJ (2011) Wet compression analysis including velocity slip effects. ASME J Eng Gas Turbine Power 133(8):081701
Span R, Wagner W (1996) A new equation of state for carbon dioxide covering the fluid region from the triple-point temperature to 1100K at pressures up to 800MPa. J Phys Chem Ref Data 25(6):1509–1596
Wu Z (2003) Backward formalism to derive the size of secondary ejected droplets produced by crown splashing of drops impinging on a solid wall. Commun Math Sci 1(1):57–67
Brun K, Kurz R, Simmons H (2006) Aerodynamic Instability and life-timing effects of inlet and interstage water injection into gas turbines. ASME J Eng Gas Turbine Power 128(3):617–625
Brun K, Gonzales LE, Platt JP (2008) Impact of continuous inlet fogging and overspray operation GE5002 gas turbine. In: Proceedings of ASME Turbo Expo 2008: power for land, sea, and air, Bd 7: education; industrial and cogeneration; marine; oil and gas applications, paper GT2008-50207, Berlin, Germany, 9–13 June
Schnitzler JP (2017) Untersuchungen zum Betriebsverhalten von vielstufigen Axialverdichtern mit Wassereinspritzung. Dissertation Universität Duisburg-Essen
Matz Ch, Kappis W, Cataldi G, Mundinger G, Bischoff S, Helland E, Ripken M (2008) Prediction of evaporative effects within the blading of an industrial axial compressor. In: Proceedings of ASME Turbo Expo 2008: power for land, sea, and air, Bd 6: turbomachinery, parts A, B, and C, paper GT2008-50166, Berlin, Germany, 9–13 June
Meacock AJ, White AJ (2004) The effect of water injection on multi-spool gas turbine. In: Proceedings of ASME Turbo Expo 2004: power for land, sea, and air. Bd 7: Turbo Expo 2004, paper GT2004-53320, Vienna, Austria, 14–17 June
Khan JR, Wang T (2009) Overspray fog cooling in compressor using stage-stacking scheme with non-equilibrium heat transfer model for droplet evaporation. In: Proceedings of ASME Turbo Expo 2009: power for land, sea, and air, Bd 4: cycle innovations; industrial and cogeneration; manufacturing materials and metallurgy; marine, paper GT2009-59590, Orlando, Florida, USA, 8–12 June
Bräunling WJ (2004) Flugzeugtriebwerke, 2. Aufl. Springer, Berlin
Munari E, D’Elia G, Morini M, Pinelli M, Spina PR (2018) Stall and surge in wet compression: test rig development and experimental results. In: Proceedings of ASME Turbo Expo 2018: turbomachinery technical conference and exposition, Bd 9: oil and gas applications; supercritical CO2 power cycles; wind energy, paper GT2018-76188, Oslo, Norway, 11–15 June
Schnitzler JP, von Deschwanden I, Benra FK, Dohmen HJ, Werner K (2014) Experimental determination of a four stage axial compressor map operating in wet compression. In: Proceedings of ASME Turbo Expo 2014: turbine technical conference and exposition, Bd 2A: turbomachinery, paper GT2014-26807, Düsseldorf, Germany, 16–20 June
Chaker MA, Meher-Homjii CB, Mee III, T (2003) Inlet fogging of gas turbine engines – experimental and analytical investigation, on impaction pin fog nozzle behaviour. In: Proceedings of ASME Turbo Expo 2003, collocated with the 2003 international joint power generation conference, paper GT2003-38801, Atlanta, Georgia, USA, 16–19 June
Balling L (2011) Fast cycling and rapid start-up: New generation of plants achieves impressive results. Mod Power Syst 31(1):35–40
Günther C, Joos F (2015) Fluid properties at gas turbine inlet due to fogging considering evaporation and condensation phenomena as well as icing risk. ASME J Eng Gas Turbine Power 173(3):032605
Günther C, Joos F (2017) Influence of non-equilibrium fluid properties during fogging on intake duct and compressor characteristics. In: Proceedings of ASME Turbo Expo 2017, Charlotte, NC, USA, GT2017-63267
Günther C, Joos F (2014) Fluid properties at gas turbine inlet due to fogging considering evaporation and condensation phenomena, IGTI/ASME Turbo Expo 2014, Düsseldorf, Germany, GT2014-25387
Günther C, Joos F (2015) Fluid properties at gas turbine inlet due to fogging considering evaporation and condensation phenomena as well as icing risk. J Eng Gas Turbines Power 137(3):032605
Zheng Q (2002) Thermodynamic analyses of wet compression process in the compressor of gas turbine. In: Proceedings of ASME Turbo Expo 2002: power for land, sea, and air, Bd 4: Turbo Expo 2002, parts A and B, paper GT2002-30590, Amsterdam, The Netherlands, 3–6 June
Lecheler S, Hoffmann J (2003) The power of water in gas turbines – ALSTOM’s experience with air inlet cooling. Power-Gen Latin America
Myoren C, Takahashi Y, Yagi M, Shibata T, Kishibe T (2013) Evaluation of axial compressor characteristics under overspray condition. In: Proceedings of ASME Turbo Expo 2013: turbine technical conference and exposition, Bd 5A: industrial and cogeneration; manufacturing materials and metallurgy; marine; microturbines, turbochargers, and small turbomachines; paper GT2013-95402, San Antonio, Texas, USA, 3–7 June
Roumeliotis I, Mathioudakis K (2007) Water injection effects on compressor stage operation. ASME J Turbomach 129(3):778–784
Payne RC, White AJ (2007) Three-dimensional calculations of evaporative flow in compressor blade rows. In: Proceedings of ASME Turbo Expo 2007: power for land, sea, and air, Bd 3: Turbo Expo 2007, GT2007-27331, Montreal, Canada, 14–17 May
Bettochi R, Morini M, Pinelli M, Spina PR, Venturini M, Torsello G (2011) Setup of an experimental facility for the investigation of wet compression on a multistage compressor. ASME J Eng Gas Turbine Power 133(10):102001-1
Bettochi R, Pinelli M, Spina PR (2003) A multistage compressor test facility: uncertainty analysis an preliminary test results. In: Proceedings of ASME Turbo Expo 2003, collocated with the 2003 international joint power generation conference, Bd 4: Turbo Expo 2003, paper GT2003-38397, Atlanta, Georgia, USA, 16–19 June. Auch veröffentlicht in: Journal of Engineering for Gas Turbines and Power, Bd 127/170
Williams J (2008) Further effects of water ingestion on axial flow compressor and aeroengines at part speed. In: Proceedings of ASME Turbo Expo 2008: power for land, sea, and air, Bd 6: turbomachinery, parts A, B, and C, paper GT2008-50620, Berlin, Germany, 9–13 June
Berdanier RB, Smith NR, Fabian JC, Key NL (2014) Humidity effects on experimental compressor performance corrected conditions for real gas. In: Proceedings of ASME Turbo Expo 2014: turbine technical conference and exposition, Bd 2A: turbomachinery, paper GT2014-25790, Düsseldorf, Germany
Sun L, Zheng Q, Li Y, Bhargava R (2011) Understanding effects of wet compression on separated flow behaviour in an axial compressor stage using cfd analysis. ASME J Turbomach 133(3):031026
Luo M, Zheng Q, Sun L, Deng Q, Li S, Liu C, Bhargava RK (2011) The numerical simulation of inlet fogging effects on the stable range of a transonic compressor stage. In: Proceedings of ASME 2011 Turbo Expo: turbine technical conference and exposition, Bd 4: cycle innovations; fans and blowers; industrial and cogeneration; manufacturing materials and metallurgy; marine; oil and gas applications, paper GT2011-46124, Vancouver, British Columbia, Canada, 6–10 June
Sun L, Li Y, Zheng Q, Bhargava R (2008). The effects of wet compression on the separated flow in a compressor stage. In: Proceedings of ASME Turbo Expo 2008: power for land, sea, and air, Bd 7: education; industrial and cogeneration; marine; oil and gas applications, paper GT2008-50920, Berlin, Germany, 9–13 June
Szabo I, Turner MG (2007) A numerical study of water injection on transonic compressor rotor performance. In: Proceedings of 45th AIAAA erospace sciences meeting and exhibit, paper AIAA2007-17, Reno, Nevada, USA, 08–11 January
Luo M, Zheng Q, Sun L, Deng Q, Chen J, Wang J (2012) On the stability of transonic compressor with wet compression and blade tip water injection. In: Proceedings of ASME Turbo Expo 2012: turbine technical conference and exposition, Bd 3: cycle innovations; education; electric power; fans and blowers; industrial and cogeneration, paper GT2012-69133, Copenhagen, Denmark, 11–15 June
Wang J, Zheng Q, Sun L, Luo M (2012) The effective positions to inject water into the cascade of compressor. In: Proceedings of ASME Turbo Expo 2012: turbine technical conference and exposition, Bd 3: cycle innovations; education; electric power; fans and blowers; industrial and cogeneration, paper GT2012-69158, Copenhagen, Denmark, 11–15 June
Harbeck J, Geist S, Joos F (2019) Secondary flow management in a compressor cascade using 3D LDA/PDA – part B: dispersed phase effects on flow topology. In: Proceedings ofASME Turbo Expo, paper GT2019-90124, Phoenix, Arizona, USA, 17–21 June
Bhargava RK, Bianchi M, Melino F, Peretto A, Spina PR(2008) Influence of compressor performance maps shape on wet compression. In: Proceedings of ASME Turbo Expo 2008: power for land, sea, and air, Bd 7: education; industrial and cogeneration; marine; oil and gas applications, paper GT2008-50761, Berlin, Germany, 9–13 June
Morini M, Pinelli M, Spina PR, Venturini M (2010) Influence of blade deterioration on compressor and turbine performance. ASME J Eng Gas Turbine Power 132(11):032401
Roumeliotis I, Mathioudakis K (2006) Water injection effects on compressor stage performance. In: Proceedings of ASME Turbo Expo 2006: power for land, sea, and air, Bd 4: cycle innovations; electric power; industrial and cogeneration; manufacturing materials and metallurgy, paper GT2006-90427, Barcelona, Spain, 8–11 May
Minghong L, Qun Z (2004) Wet compression system stability analysis part I. In: Proceedings of ASME Turbo Expo 2004: power for land, sea, and air, Bd 4: Turbo Expo 2004, paper GT2004-54018, Vienna, Austria, 14–17 June
Qun Z, Minghong L (2004) Wet compression system stability analysis part II. In: Proceedings of ASME Turbo Expo 2004: power for land, sea, and air, Bd 4: Turbo Expo 2004, paper GT2004-54020, Vienna, Austria, 14–17 June
Grüner TG, Bakken LE (2012) Instability characteristic of a single-stage centrifugal compressor exposed to dry and wet gas. In: Proceedings of ASME Turbo Expo 2012: turbine technical conference and exposition, Bd 8: turbomachinery, parts A, B, and C, paper GT2012-69473, Copenhagen, Denmark, 11–15 June
Ferrara V, Bakken LE (2015) Wet gas compressor surge stability. In: Proceedings of ASME Turbo Expo 2015: turbine technical conference and exposition, Bd 9: oil and gas applications; supercritical CO2 power cycles; wind energy, paper GT2015-42650, Montreal, Quebec, Canada, 15–19 June
Lecheler S, Florjancic S, Cataldi G (2004) Fogging and high fogging: ALSTOM’s experience and costumer benefits. Power-Gen Europe
Beiler JD, Trauner P (2012) High efficient peak power on demand, POWERGen Middle East, 6–8 February, Quatar, Doha
Chaker M, Meher-Homji CB, Mee III, T (2002a) Inlet fogging of gas turbines engines – part A: fog droplet thermodynamics, heat transferand practical considerations. In: Proceedings of ASME Turbo Expo 2002: power for land, sea, and air, Bd 4: Turbo Expo 2002, parts A and B, paper GT2002-30562, Amsterdam, The Netherlands, 3–6 June
Chaker M, Meher-Homji C B, Mee III T (2002b) Inlet fogging of gas turbines engines – part B: fog droplet sizing analysis; nozzle types; measurementand testing. In: Proceedings of ASME Turbo Expo 2002: power for land, sea, and air, Bd 4: Turbo Expo 2002, parts A and B, paper GT2002-30563, Amsterdam, The Netherlands, 3–6 June
Meher-Homji CB, Chaker MA (2013) Power augmentation approaches for mechanical drive turbines. In: Proceedings of ASME Turbo Expo 2013: turbine technical conference and exposition, Bd 5A: industrial and cogeneration; manufacturing materials and metallurgy; marine; microturbines, turbochargers, and small turbomachines, paper GT2013-94526, San Antonio, Texas, USA, 3–7 June
Shah PN, Tan CS (2005) Effect of blade passage surface heat extraction on axial compressor performance. In: Proceedings of ASME Turbo Expo 2005: power for land, sea, and air, Bd 6: Turbo Expo 2005, parts A and B, paper GT2005-68815, Reno, Nevada, USA, 6–9 June
van Liere J, Laagland GHM, Meijer CG (2002) Leistungssteigerung und NOx-Reduktion der Gasturbinen durch SwirlFlash®-Overspray-Eindüsung. VGB PowerTech, 2/2002
Deneve M, De Tandt B, Comelis N, Bultereys C, Gijbels S (2005) Results of the first Application of the Swirl-Flash™ Wet Compression System on a 150MW Heavy-Duty Gas Turbine. In: Proceedings of ASME Turbo Expo 2005: Power for Land, Sea, and Air, Volume 4: Turbo Expo 2005, Paper GT2005-68726, Reno, Nevada, USA, June 6–9
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature
About this chapter
Cite this chapter
Joos, F. (2020). Einfluss von Wassertropfen oder Partikeln in der Verdichterluft. In: Aerodynamik axialer Turbokompressoren. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-28937-9_11
Download citation
DOI: https://doi.org/10.1007/978-3-658-28937-9_11
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-28936-2
Online ISBN: 978-3-658-28937-9
eBook Packages: Computer Science and Engineering (German Language)