Übersicht
Dieses Kapitel widmet sich dem Zielfeld der Adaptronik „Aktive Vibrationskontrolle“, im Englischen als „Active Vibration Control “ bezeichnet. Anknüpfend an das vorangehende Kapitel legen einfache analytische Betrachtungen an Balkenmodellen die Grundlage zur Modellierung von Schwingungen in kontinuierlichen Systemen mit applizierten Funktionselementen. Betrachtungen ebener Platten erweitern diese Sichtweise, die Grundlage der aktiven Schallbeeinflussung in Kap. 8 sind. Auf dem anschließend erläuterten Begriff der Körperschallinterferenz bauen die dargestellten Methoden der aktiven Vibrationskontrolle auf. Ein weiterer Abschnitt geht auf Methoden der strukturdynamischen Identifikation aktivierbarer Strukturen ein. Neben den Methoden der Erzeugung von Körperschallinterferenz erläutert dieses Kapitels adaptive Schwingungstilgung und Schwingungstilgung durch elektromechanische Netzwerke. Der gedankliche Zusammenhang des Kapitel ist in Abb. 6.1 illustriert. Abschließend wird ein Einblick in Themen aktueller Forschung für aktive Vibrationskontrolle gegeben.
Der große Kunstgriff, kleine Abweichungen von der Wahrheit für die Wahrheit selbst zu halten, worauf die ganze Differential-Rechnung gebaut ist, ist auch zugleich der Grund unsrer witzigen Gedanken, wo oft das Ganze hinfallen würde, wenn wir die Abweichungen in einer philosophischen Strenge nehmen würden.
Georg Christoph Lichtenberg (1742–1799)
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
benannt nach John William Strutt, 3. Baron Rayleigh (1842–1919), Englischer Physiker, Nobelpreis für Physik 1904
- 2.
benannt nach Claude Louis Marie Henri Navier (1785–1836), Französischer Mathematiker und Physiker
- 3.
benannt nach Ernst Lehr (1896–1945), Deutscher Werkstoffwissenschaftler und Maschinenbauer, verfasste 1930 „Schwingungstechnik – Ein Handbuch für Ingenieure “
- 4.
formuliert durch David Hilbert (1862 – 1943), deutscher Mathematiker
- 5.
Gaspard de Prony (1755–1839), französischer Mathematiker und Ingenieur
- 6.
benannt nach Hermann Hankel (1839 – 1873), deutscher Mathematiker
- 7.
Johann Carl Friedrich Gauß (1777–1855), deutscher Mathematiker, Physiker und Astronom
- 8.
Pierre-Simon Marquis de Laplace (1749–1827), französischer Mathematiker, Physiker und Astronom
- 9.
benannt nach Jacques Hadamard (1865–1963), französischer Mathematiker
- 10.
benannt nach Leonard Euler (1707–1783), Schweizer Mathematiker
- 11.
benannt nach Georg Simon Ohm (1789–1854), deutscher Physiker
- 12.
benannt nach William Rowan Hamilton (1805–1865), irischer Mathematiker und Physiker
- 13.
benannt nach William Thomson, 1. Baron Kelvin (1824–1907), britischer Physiker
- 14.
Ein leichter Hubschrauber des deutschen Herstellers Messerschmitt-Bölkow-Blohm.
- 15.
Auch die Steuerachse und der Neutralpunkt des Profils liegen bei c/4.
Literatur
S. Algermissen, R. Keimer, M. Rose, M. Straubel, M. Sinapius, H. P. Monner, Smart-structures technology for parallel robots. J. Intell. Robot. Syst. (2011)
U. T. P. Arnold, M. Müller, P. Richter, Theoretical and experimental prediction of individual blade control benefits, in Proc. of the 23rd European Rotorcraft Forum, Dresden, Germany, 1997
U. T. P. Arnold, G. Strecker, Certification, ground and flight testing of an experimental IBC system for the CH-53G helicopter, in Proc. of the American Helicopter Society 58th Annual Forum, Montreal, Canada, 2002
P. Avitable, Modal Testing: A Practitioner’s Guide (John Wiley and Sons, Chichester, 2017)
S. Behrens, A. J. Fleming, S. Moheimani, Multiple mode current flowing passive piezoelectric shunt controller. J. Sound Vib., 266(5), 929–42 (2003)
E. R. Booth, M. L. Wilbur, Acoustic aspects of active-twist rotor control, in American Helicopter Society 58th Annual Forum, Montreal, Canada, 2002)
E. Breitbach, Adaptiver Schwingungstilger. Patent DE 103 51 243 B4, 2005
A. Büter, E. Breitbach, Adaptive blade twist – calculations and experimental results. Aerosp. Sci. Technol. 4, 309–319 (2000)
C. E. S. Cesnik, S. Shin, M. L. Wilbur, Dynamic response of active twist rotor blades. Smart Mat. Struct. 10, 62–76 (2000)
R. Derham, D. B. Weems, M. B. Mathew, R. C. Bussom, The design evolution of an active materials rotor, in Proc. of the American Helicopter Society 57th Annual Forum, Washington DC, USA, 2001
DIN EN 1299, Mechanische Schwingungen und Stöße – Schwingungsisolierung von Maschinen – Angaben für den Einsatz von Quellenisolation. Technical report, DIN Deutsches Institut für Nennung e.V., 2008
D. Ewins, Modal Testing – Theory, Practice and Application, 2. Aufl. (Research Studies Press, Philadelphia, 2000)
A. Fleming, S. Behrens, O. Moheimani, Reducing the inductance requirements of piezoelectric shunt damping systems. J. Smart Mater. Struct., 12, 57–64 (2003)
M. Friswell, J. Mottershead, Finite Element Model Updating in Structural Dynamics (Springer, Dordrecht, 1995)
R. Gasch, K. Knothe, R. Liebich, Strukturdynamik: Diskrete Systeme und Kontinua, 2. Aufl. (Springer Verlag, Berlin, 2012)
B. Gmelin, H. Heller, Ergebnisse der Hubschrauberforschung in der DFVLR: Entwicklung und Erprobung der höherharmonischen Rotorsteuerung (HHC), in Proc. des 4. BMFT-Statusseminar, Hubschraubertechnologie, Bd. II, München, Germany, 1986
H. Irretier, Grundlagen der Schwingungstechnik, 1. Aufl. (Vieweg, Braunschweig, 2000)
S. A. Jacklin, A. Haber, G. de Simone, T. R. Norman, C. Kitaplioglu, P. Shinoda, Full-scale wind tunnel test of an individual blade control system for a UH-60 helicopter, in Proc. of the American Helicopter Society 58th Annual Forum, Montreal, Canada, 2002
H. Jäger, R. Mastel, M. Knaebel, Technische Schwingungslehre (Springer Vieweg, Wiesbaden, 2013)
W. Johnson, Helicopter Theory, Kap. 17 Noise (Dover Publications, New York, 1994). ISBN 0-486-68230-7
W. Johnson. Helicopter Theory, Kap. 12-5 Vibration and Loads (Dover Publications, New York, 1994). ISBN 0-486-68230-7
R. Keimer, M. Sinapius, Robotic Systems for Handling and Assembly, Kap. Design and implementation of adaptronic robot components, Springer, Heidelberg, 2010, S. 413–427
S. Keye, R. Keimer, S. Homann, A vibration absorber with variable eigenfrequency for turboprop aircraft. Aerosp. Sci. Technol. 13(4), 165–171 (2009)
B. T. Kletz, Aktive Schwingungsberuhigung mit reflektierenden und isolierenden Verbindungselementen in mehrfach angeregten Strukturen. Dissertation, Otto-von-Guericke-Universität Magdeburg 2017
K. Knothe, H. Wessels, Finite Elemente – Eine Einführung für Ingenieure (Springer, Berlin, 1999)
P. Konstanzer, B. Enenkl, P. A. Aubourg, P. Cranga, Recent advances in Eurocopter’s passive and active vibration control, in Proc. of the American Helicopter Society 64th Annual Forum, Montreal, Canada, 2008
S. Körber, J. Ballmann, Mechanisms and acoustics of Blade-Vortex-Interactions. Z. Flugwissenschaften und Weltraumforschung 19, 397–406 (1995)
T. Krysinski, F. Malburet, Mechanical Vibrations – Active and Passive Control, Kapitel 1 Sources of Vibrations. (ISTE Ltd., London, 2007). ISBN 978-1-905209-29-3
R. Kube, Simultaneous vibration and BVI noise feedback for closed loop higher harmonic control: influence of rotor dynamics on controller design, in Proc. of the 19th European Rotorcraft Forum, Cernobbio, Italy, 1993
M. Link, Theory of a method for identifying incomplete matrices from vibration test data. Z. d. Flugwissenschaft (ZFW) 9(2,3) (1985)
N. Maia, J. Silva (Hrsg.), Theoretical and Experimental Modal Analysis (Research Studies Press, Baldock, 1997)
C. Maucher, Adaptives Hubschrauberrotorblatt mit aktiver Hinterkante – rechnerische und experimentelle Konzeptuntersuchung. Dissertation, Technische Universität München, 2011
C. Maucher, B. Grohmann, P. Jänker, Review of adaptive helicopter rotor blade actuation concepts in Proc. of the Adaptronic Congress 2006, Göttingen, Germany, 2006
H. Monner, S. Opitz, J. Riemenschneider, P. Wierach, Evolution of active twist rotor designs at dlr, in Proc. of the 16th AIAA/ASME/AHS Adaptive Structures Conference, Schaumburg, USA, 2008
J. Mottershead, M. Friswell, M. Link, Sensitivity Methods in Model Updating (Elsevier Science & Technology Books, Amsterdam, 2012)
M. Müller, U. T. P. Arnold, D. Morbitzer, On the importance and effectiveness of 2/rev IBC for noise, vibration and pitch link load reduction, in Proc. of the 25th European Rotorcraft Forum, Rome, Italy, 1999
S. Opitz, J. Riemenschneider, Measurement of the dynamic tip twist angles of an active twist model scale rotor blade, in Proc. of the 36th European Rotorcraft Forum, Paris, France, 2010
S. Opitz, J. Riemenschneider, H. P. Monner, Modal investigation of an active twist helicopter rotor blade, in Proc. of the ICAST – International Conference on Adaptive Structures and Technologies, Hong Kong, China, 2009
C. H. Park, Dynamics modelling of beams with shunted piezoelectric elements. J. Sound Vib. 268, 115–129 (2003)
P. R. Payne, Higher harmonic rotor control. Aircraft. Eng. 30(354) (1958)
A. Phillips, R. Allemang, Single degree-of-freedom modal parameter estimation, in Proc. XIV In’ll Modal Analysis Conference, 1996
J. Riemenschneider, S. Opitz, P. Wierach, H. M. des Rochettes, L., S. 253–260 Buchaniek, D. Joly, Structural design and testing of active twist blades – a comparison, in Proc. of the 35th European Rotorcraft Forum, Hamburg, Germany, 2009
O. Schneider, Analysis of SPR measurements from HART II. Aerosp. Sci. Technol. 9(5), 409–420 (2005)
O. Schneider, B. G. van der Wall, Preparation of SPR Data from HART II. DLR-IB 111-2003/07 (2003)
S. Shin, C. S. Cesnik, S. R. Hall, Design and simulation of integral twist control for helicopter vibration reduction. Int. J. Control, Autom. Syst. 5, 24–34 (2007)
M. Sinapius, R. Lake, Computer-controlled normal mode tuning, in Int’l Forum on Aeroelasticity and Structural Dynamics, S. 89–99, 1999
W. R. Splettstoesser, K. J. Schultz, R. Kube, T. F. Brooks, E. R. Booth, G. Niesl, O. Streby, Bvi impulsive noise reduction by higher harmonic pitch control: Results of a scaled model rotor experiment in the dnw, in Proc. of the 17th European Rotorcraft Forum, Berlin, Germany, 1991
P. Steinke, Finite-Elemente-Methode (Springer, Heidelberg, 2015)
T. R. Norman, C. Theodore, P. Shinoda, D. Fuerst, U. P. Arnold, S. Makinen, P. Lorber, J. O’Neill, Full-scale wind tunnel test of a UH-60 individual blade control system for performande improvement and vibration, loads and noise control, in Proc. of the American Helicopter Society 65th Annual Forum, Grapevine, USA, 2009
B. van der Wall, Der Einfluss aktiver Blattsteuerung auf die Wirbelbewegung im Nachlauf von Hubschrauberrotoren. Dissertation, Technische Universität Carolo-Wilhelmina zu Braunschweig, 1999
B. G. van der Wall, C. L. Burley, 2nd HHC Aeroacoustic Rotor Test (HART II) -Part II: Represenative Results}. DLR-IB 111-2005/03, 2005
T. Weyer, Entwurf selbsteinstellender aktiver elektromechanischer Tilger. Dissertation, Technische Universität Carolo-Wilhelmina zu Braunschweig, 2007
P. Wierach, J. Riemenschneider, S. Opitz, F. Hoffmann, Experimental investigation of an active twist model rotor blade under centrifugal loads, in Proc. of the 33rd European Rotorcraft Forum, Kazan, Russia, 2007
M. L. Wilbur, W. T. Yeager, M. K. Sekula, Further examination of the vibratory loads reduction results from the NASA/ARMY/MIT active twist rotor test, in Proc. of the American Helicopter Society 58th Annual Forum, Montreal, Canada, 2002
S.-Y. Wu, Method for multiple mode shunt damping of structural vibration. J. Intell. Material Syst. Struct. 9, 991–998 (1998)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature
About this chapter
Cite this chapter
Sinapius, J.M., Kletz, B.T., Opitz, S. (2018). Aktive Vibrationskontrolle. In: Adaptronik. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-55884-3_6
Download citation
DOI: https://doi.org/10.1007/978-3-662-55884-3_6
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-55883-6
Online ISBN: 978-3-662-55884-3
eBook Packages: Computer Science and Engineering (German Language)