Radiodetection SPX RD 7200 Cable Pipe Locator w/ TX-5 Transmitter
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
RD7200 Cable, Pipe and RF Marker Locator
Key Features:
- Rugged yet light weight and ergonomic
- Designed and built to the highest standards in Great Britain
- Self Test for confidence and trust in your locator measurements
- Easy to deploy and use - provides fast, precise and repeatable measurements
- Industrial grade display, for outdoor usage
- RD7200 locators and transmitters use transflective low power LCD technology that uses ambient light to improve screen readability in direct sun light and extend battery life.
- TruDepth™ and current readout, for extra assurance
- Radiodetection’s TruDepth displays precise depth and current measurements, only when the RD7200 is correctly oriented above the target. Measurement consistency gives high confidence that the correct line is being followed.
- High performance audio and vibration alerts, for noisy environments
- The RD7200 waterproof speaker housing has been tuned to provide optimum resonance for your choice of high or low frequency tones.
- 5 power output audio levels and vibration alerts, assist technicians working in challenging situations.
Water and Pipeline
A wide choice of active frequencies allow conductive pipes to be traced for long distances. Where sondes or cameras are used to survey pipes made from a variety of materials (including cast iron, clay, fiber, concrete and brick) the four RD7200 sonde frequencies are ideal for quickly locating and tracing their position. Pipes with Cathodic Protection System can be followed using the CPS passive mode. CPS compass mode ensures alignment with the target pipeline.
Power
In complex power environments, with multiple signals from high voltage equipment and cables, Radiodetection’s Dynamic Overload Protection reduces the effect of interference and Power Filters can be used to trace a single target line amongst multiple cables.
Telecom
TheRD7200 features higher frequencies to locate high impedance lines and sonde frequencies for duct and conduit tracing. Higher frequencies can also be used to trace sheathed domestic cables without grounding connections.
Cable sheath faults can be located to within 4” (10cm) using 8kHz Fault Find mode with a Radiodetection A-Frame
Construction
Accurate and simple to use, the RD7200 comes with eight active and three passive frequencies that cover the majority of site locating tasks. A rugged, IP65 rated casing along with a high contrast screen make it suitable for use in all weather conditions.
| RD7200 Specifications | |
| 1. Product Summary | |
| 1.1 Product Descriptions: | Precision Buried Utility Locator Precision Cable and Pipe Locator Locate System Receiver Utility Specific Precision Locator |
| 1.2 Inteded Use: | Locating the position / path of buried pipes and cables Detecting and pinpointing insulation faults on buried pipes and cables |
| 1.3 Standard Equipment: | Locator Quickstart guide Mini USB 2.0 compliant data cable |
| 2. Performance | |
| 2.1 Sensitivity: | 6E-15 Tesla 5µA at 1 meter (33kHz) |
| 2.2 Dynamic range: | 140dB rms/√Hz |
| 2.3 Selectivity: | 120dB/Hz |
| 2.4 Depth measurement precision1 : | ± 3% |
| 2.5 Locate accuracy: | ± 5% of depth |
| 2.6 Active Locate filter bandwidth: | ± 3Hz, 0 < 1kHz ± 10Hz, ≥ 1kHz |
| 2.7 Start-up time: | Less than 1 second |
| 2.8 Maximum depth readout2: | Metric: Cable / Pipe: 30m Sonde: 19.5m Imperial: Cable / Pipe: 98' Sonde: 64' |
| 3. Locate Functions | |
| 3.1 Active Locate Modes: | Up to four, model dependent: • Peak • Peak+™ (choice of combined Peak & Guidance or Peak & Null) • Guidance • Null |
| 3.2 Gain control: | Guidance Mode: Automatic Other modes: Manual gain using “+” or “-” with one touch to return to center (50% of Full Scale) |
| 3.3 Active frequencies: | - 512Hz - 640Hz - 8kHz - 33kHz - 65kHz - 83kHz - 131kHz - 200kHz |
| 3.4 Sonde Frequencies: | - 512Hz - 640Hz - 8kHz - 33kHz |
| 3.6 Passive Locate Modes: | - Power - Radio - CPS (Cathodic Protection System) |
SPX Radiodetection TX-5 Precision Locate Cable & Pipe 5 Watt Transmitter
Product Overview:
The Tx family of signal transmitters has been designed to complement Radiodetection’s advanced high-precision cable and pipe locators including the RD8100, RD7100, marker locator and PCM ranges
Product Description:
- Signal transmitter
- Multi-function transmitter
- Cable and pipe transmitter
Intended Use:
Use with a locator or marker locator from Radiodetection’s precision locator range to find and trace cables and pipes. Use with a PCM locator to boost the locate signal for a pipeline survey.
| Specifications | |
| Max Power Out Put | 5W |
| Max Voltage Output | 90V |
| Max Current Output | 0.5A |
| Induction Field Strength | 0.9 |
| Active Frequencies | 512Hz DC 570Hz DC 577Hz DC 640Hz DC 760Hz DC 870Hz DC 920Hz DC 940Hz DC Induction 4kHz (4096Hz) DC Induction Clamp 8kHz (8192Hz) DC Induction Clamp 9.8kHz (9820Hz) DC Induction Clamp 33kHz (32,768Hz) DC Induction Clamp 65kHz (65,536Hz) DC Induction Clamp 83kHz (83,077Hz) DC Induction Clamp 131kHz (131,072Hz) DC Induction Clamp 200kHz DC Induction Clamp |
| Fault Find | 8kHz (8192Hz) |
| Information displayed | - Battery level indicator - Operation mode readout - Standby icon - Output level indicator - Mode of operation indication - Induction - Direct connection - Clamp mode - DC power connected indicator - A-frame: Indicates when the transmitter is in Fault-Find Mode - CD Mode: Indicates when the transmitter is in Current Direction Mode - Voltage warning indicator: Indicates that the transmitter is outputting potentially hazardous voltage levels or high voltage across DC output leads - Volume level indicator - Pairing icon: Appears when the transmitter and locator are connected via iLOC - Bluetooth icon: Indicates status of Bluetooth connection. Flashing icon means pairing is in progress - Measurements: Voltage, current, power and impedance |
Radiodetection SPX RD 7200 Cable Pipe Locator w/ Radiodetection SPX TX-5 5 Watt Transmitter
The new RD7200 is a no compromise all-industry locator, designed for accurate and effective every day use.
RD 7200 RD7200 RD-7200 TX 5
Radio Detection RD 7200 TX-5 RD7200 TX5 Cable Pipe Fault Locator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# -L/T*
- Radiodetection RD7200 Locator (BC# -L/T*)
- Radiodetection TX-5 5 Watt Transmitter (-L/T)