WTB: Dura Ace bl-7401 brake lever hood
#1
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
WTB: Dura Ace bl-7401 brake lever hood
I have a pair of bl-7401 aero levers. They are very nice, but I'm missing the rubber hood for one side. I think it's the right side. I can check if someone only has one.
They don't fit any hoods other than the actual bl-7401 hoods, as far as I know. People have used the bl-1055 hoods, but it doesn't look great. Does anyone have any hoods for these? Would pay somewhat decent money.
Pics, if it helps, below.
Like this without hoods:
Like this with hoods:
Thank you!
They don't fit any hoods other than the actual bl-7401 hoods, as far as I know. People have used the bl-1055 hoods, but it doesn't look great. Does anyone have any hoods for these? Would pay somewhat decent money.
Pics, if it helps, below.
Like this without hoods:
Like this with hoods:
Thank you!
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#2
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
Shimano 600 6209 hoods use the same lever body and fit perfectly.
Only difference is they are stamped Shimano instead of Dura Ace.
Often easier/cheaper to buy a set of 6209 levers than spring for a set of hoods.
Side note: 7402 hoods will not fit properly.
Only difference is they are stamped Shimano instead of Dura Ace.
Often easier/cheaper to buy a set of 6209 levers than spring for a set of hoods.
Side note: 7402 hoods will not fit properly.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#3
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
As noted above: I'll also take a set of Shimano 600 BL-6209 hoods, OR a set of levers. I have found a pair for around $50, so that's the price to beat.
Thanks to anyone who might raid their parts bins for me!
Thanks to anyone who might raid their parts bins for me!
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#4
Junior Member
Join Date: Aug 2017
Location: Atlanta
Posts: 130
Bikes: '87 Centurion Ironman Expert, '88 Basso Loto, '89 Panasonic MC-5500, '92 Vitus 992
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 60 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
Not sure if these will be an exact fit, but I have a set of 6401 levers that I don't know what the previous owner did to, so they're in weird shape. The hoods aren't in great shape, worn and with a small rip that's not a hole yet, but you can have them if you want:
#5
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Can have them? Like for free?
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#8
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Oooh! Let me get back to you with which side it is! This could be potentially very good! With my luck, it will be the right I need..
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#9
Junior Member
Join Date: Aug 2017
Location: Atlanta
Posts: 130
Bikes: '87 Centurion Ironman Expert, '88 Basso Loto, '89 Panasonic MC-5500, '92 Vitus 992
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 60 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
Umm, how about free as in the cost of shipping?
I also found some cheap ones on eBay (these are also 6401): https://www.ebay.com/itm/40319843231...IAAOSwRYJhVOCq
I also found some cheap ones on eBay (these are also 6401): https://www.ebay.com/itm/40319843231...IAAOSwRYJhVOCq
#10
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Left is the one I need! Any idea if this is from a 7401 or 7402 lever?
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#11
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Umm, how about free as in the cost of shipping?
I also found some cheap ones on eBay (these are also 6401): https://www.ebay.com/itm/403198432319?hash=item5de07fd43f:g-IAAOSwRYJhVOCq
I also found some cheap ones on eBay (these are also 6401): https://www.ebay.com/itm/403198432319?hash=item5de07fd43f:g-IAAOSwRYJhVOCq
I'll probably buy the ebay hoods to complete their transformation. They'll go on my Colin Laing tandem, which will favor having the SLR levers because of the long cable runs and weak canti springs.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#12
Senior Member
#13
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Would you be able to take a picture of the inside of it, so I can see the little ridges that engage the grooves on the lever body? That will allow me to be a bit more sure.
Also, if it does look good, what are you thinking you want for it?
Also, if it does look good, what are you thinking you want for it?
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#14
Senior Member
#15
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
I will check my levers hopefully tonight! Looks good from my memory though!
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.