2004 3x Triple Crankset. 104/64 bcd, Square Taper JIS +BB

I upgraded my 2004 Fuji to a 1x drivetrain so now I have some non needed parts. I know these are not the latest and greatest tech, but if you are looking to replace some broke or worn out parts to keep your old bike alive, then you know this stuff can be difficult to track down. I have the cranks arms, chain rings, and bottom bracket. It's all in used condition, some scratches, but all functional, good threads, etc. Let me know if you need all of it, or if you need just part of it make me an offer. I prefer to ship to US only. I'll eat paypal fees, buyer pays shipping.

So here's what happened, I started off with both Truvativ crank arms for a 3x setup, 175mm long, 104 bcd for the big rings and 64 bcd for the small ring. The drive side arm developed a crack right at the bolt holes. The closest replacement I could find on ebay was the Specialized Strongarm II. So it doesn't match aesthetically but the specs are the same. I included the broken arm in the pictures so you can see the replacement. If you can weld and want the broken truvativ arm I could include that. I can also include some chain ring bolts if you need them.

What's available:
-175mm Specialized Strongarm II drive side crank arm for triple crankset. Square Taper JIS. Pedal threads are good. 104/64bcd. Includes cap screw.

-175mm Truvativ Isoflow non-drive side crank arm Square Taper JIS. Pedal threads are good. Includes cap screw.

-Shimano Bottom Bracket, BB-LP20 sealed cartridge. Square Taper JIS, 113mm spindle length. 68mm English thread, BC 1.37x24.

-22-32-42T Chain rings. Used for sure, but lots of life left for being 15 years old, the bike has pretty low mileage. The middle 32t ring is bent from a poorly timed uphill shift while standing (yeah, I know better now!) Works as is, or could be bent back if you have the skills, or cheaply replaced.

-(8) Chain ring bolts if you need them.

-broken Truvativ crank arm if you really want it.