Locations
Timken®
LAK2 7/16
Timken® LAK2 7/16 Normal Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 7.406 in L Bolt Center-to-Center, 2.687 in Base to Bore Centerline, 9.437 in OAL x 5.406 in OAH
- Item#: LAK2 7/16
- Mfr#: LAK2 7/16
- UPC: 087796061521
- Heavier than our standard block with solid, flat feet for increased strength
- Compact, one-piece housing can be mounted in any position
- Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
- Pre-lubricated and ready for immediate installation
- Grease fitting for relubrication
- All units are supplied with G-KLLB wide-inner-ring ball bearing and locking collar
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.
Timken® Pillow Block Ball Bearing Unit, Normal Duty, Series: LAK, 2-7/16 in Bore, 7.406 in Bolt Center-to-Center Length, 2.687 in Base to Bore Centerline, 9.437 in Overall Length, 3-1/16 in Overall Width, 5.406 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.374 in Base Width, Eccentric Collar Locking Device, Labyrinth Seal, Non-Expansion (Fixed), 13200 lb Dynamic/8000 lb Static Load, 250 deg F, 4120 rpm Maximum, Cast Iron, Uncoated
SPECIFICATIONS
| Base Width | : | 2.374 in |
| Type | : | Normal Duty |
| Base to Bore Centerline | : | 2.687 in |
| Series | : | LAK |
| Bolt Center-to-Center Length | : | 7.406 in |
| Mounting Type | : | Two-Bolt Base |
| Expansion Type | : | Non-Expansion (Fixed) |
| Locking Device | : | Eccentric Collar |
| Finish | : | Uncoated |
| Overall Length | : | 9.437 in |
| Bore Type | : | Round |
| Load Capacity | : | 13200 lb Dynamic/8000 lb Static |
| Material | : | Cast Iron |
| Maximum Speed | : | 4120 rpm |
| Overall Width | : | 3-1/16 in |
| Duty Type | : | Normal |
| Inside Diameter | : | 2-7/16 in |
| Mounted | : | Yes |
| Overall Height | : | 5.406 in |
| Measurement System | : | Imperial |
| Seal Type | : | Labyrinth |
| Temperature Rating | : | 250 deg F |
