Temperatre Cooling Unit (TCU)

Single Chill Compact C-1-L (C1L)

Year of construction: 2014, Condition: used, Temperature range -5 - +30°C °C heating capacity / kW Cooling capacity 2000 W weight of the machine ca. 130 kg Baq7wtzck3i SINGLE temperature control unit cooling unit Type: Chill Compact C-3-L Year of construction: 2014 Cooling capacity: 2.0kW Apparent power: 4.6kVA Permitted min/max. Temperature TS: -5 - +30°C Max. operating pressure PS: 17 bar Test pressure PT: 21 bar Filling weight: 1.8 kg

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device Cnt39rko -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2013, Condition: good (used), The device was checked for function in my workshop Bdtjyhy8kwg See type plate

Year of construction: 2016, Condition: ready for operation (used), Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: lled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: 35°C.Length: 1100mm, width: 750mm, height: 1100, empty weight: approx. 220kg. Betwaktb

Year of construction: 2004, Condition: used, STW 1 - 36 - B12/30-ZS, year of made 2004 Germany, weight 156 kg Cnjn8p0ikk Sensor Pt100, -30...+400°C Max. Ambient Temperture 55°C

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 90°C Max. external volume: 50 ltr at 90°C max. Flow rate 54 l/min  max. Delivery pressure 6.0 bar Dimension L x W x H 639 x 266 x 562 mm  Weight approx. 50 kg Bkw8xhwseh *HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / Industry 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - More powerful pump, hydraulic parts made of VA, magnetically coupled - Mould draining by suction - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only complied with if specified in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Single Single SKA 3 - L liquid cooling New price 5.891,- € Field of application: All applications requiring liquid cooling are served by the cooling systems and units of the SKA series. With their own refrigeration circuit and a huge cooling capacity spectrum, they are used in all industrial sectors. Unit type: SKA 3 - L Refrigerant: R 134a Cooling capacity: 3.000 W Reference values for cooling capacity data: 10°C flow temperature 30°C ambient temperature Temperature range: -5°C to +30°C Equipment: Regulation and control unit SBC: digital display of set point and flow temperature, alarm displays and many other features resistance thermometer PT 100 and sensor breakage protection stainless steel tank, capacity: 16 liters corrosion resistant components (stainless steel/non-ferrous metal) Level monitoring by magnetic float switch High and low pressure limiter Grid cover over condenser in unit color Control box IP54 Submersible pump T 601 -Delivery capacity max. 60 l Bfwgvcpjxb8 -Delivery pressure max. 3.8 bar -motor power 0,5 kW condenser: air-cooled air volume: 2,250 cbm/h max. inlet temperature: 42°C (power reduction) connected load: 2,33 kW (4,7 kVA max. ) dimensions L/W/H: 910 mm x 575 mm x 810 mm (without connections) weight approx. 130 kg Item condition; used complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Single Vwlo0m STL 1-12-B10/20-TKN6 Temperature control technology

Condition: good (used), For sale are two single devices. These devices were checked in our workshop for their function. Warranty : 6 months H2zsn2m 400 V / 50 Hz Heating capacity : 9,0 kW Cooling capacity : 23200 W Circulation medium: water up to 90°C

Condition: ready for operation (used), Heat exchanger, capacity and technical data see picture 2, cooling capacity 14kw, connected load 8,2 Kw Bvqd7ss27y

Year of construction: 2023, Condition: new, Max. temperature: 160° Heating power: 9kW Cooling power: 50kW Flow rate: 38 l/min Pump: magnetic clutch controller: SBC-Tplus flow measurement Current interface 20mA , TTY; Protocol selectable; Plug 16 A/ CEE, completely installed tool-draining suction of the external consumer plug 16 A/ CEE completely installed labels: Pictogram Coating Frontdoor: RAL7016 Coating Housing: RAL7035 Iryv2aht

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). Bxbaybndyo *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2009, Condition: as good as new (ex-display), See photo, unused, In stock Paib2

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled Bkw9c2unro - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2009, Condition: ready for operation (used), See last photo Ielbrbj

Condition: not inspected (used), year 2009, power 6Kw, 400Volt, 150 degrees Bt0bht3tcr

Year of construction: 2013, operating hours: 34,981 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1 790 57 299, TECHNICAL DETAILS CNC control: SINUMERIK 840 DE Table diameter: 420 mm oscillating circle: max 620 mm Center height: 420 mm Turret stroke: 280 mm Tailstock stroke: 330 mm Spindle bore: 50 mm Axis programmable ranges + and - X1: 320 mm Z1: 844 mm C1 (spindle): max 6000 rpm W1: 1400 mm (tailstock) Beg8wbe X3: 1500 mm Z3: 509 mm Max axis speed: 24000 mm/min (X3 60000, Z3 30000 mm/min) EQUIPMENT Progr. tailstock Attached tools Loading device Tool measuring station The machine is in excellent condition

Condition: used, Here we offer you a Trumpf Vectormark laser marker. Trumpf Vectormark Trumpf VMc1 Trumpf HSR 10 Laser type: YAK laser Wavelength: 1064nm Max. power: 30 W Device type: VMC1 Laser class: 4 Type: VMc1 Condition: Spare parts carrier Cx0yseix Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2017, Condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW Dn3ewx year 2017 price: 4.950 € contact: Mr. Rainer Eckerle

fuel type: electric, color: yellow, lifting height: 5,930 m, mast type: duplex, Year of construction: 2003, operating hours: 8,500 h, Condition: good (used), overall weight: 4,000 kg, Equipment: Pallet forks, TRILATERAL TROLLEY FOR NARROW CORRODOIO CAPACITY 1000 KG WORKING HOURS 8500 FORKS 800 LIFTING HEIGHT 5930CM BATTERY 48V WEIGHT WITHOUT BATTERY 4000KG Bjgakwm09q8 BATTERY WEIGHT 1360KG WITH BATTERY CHARGER EXCELLENT STATE OPERATING 2003

Year of construction: 1999, Condition: excellent (used), Helmut Knorr L-450-1-W Pile Lifter Stacking lift with automatic lift system max size 50 x70 cm Czdigoetx In very good condition

Condition: excellent (used), RNA 900 mm diameter vibration feeder, component feeder / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Type: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 min - 1 Voltage: 220 V Power: 5.4 Diameter: 900 mm A = Output height: 167mm B = Trail width: 50mm D = Bowl diameter: 980mm H = bowl height: 250mm S = Track division: 81mm Cbfiervbkp

Year of construction: 2022, operating hours: 2 h, Condition: used, High Lift stacker Capacity: 1000kg Lift height: 3300mm Closed height: 2195mm Goxqzxdwvv Mast type: Standard Fork length: 1150mm YOM: 2022 Zustand Technisch: New Bereifung vorne Grösse: Tandem Batterie Ah: 106Ah Batterie Zustand: 80 - 100% Initial lift,

Year of construction: 2023, Condition: new, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment Yvwaaw SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Industrial oven, drying oven Type: PKL-1 B3jq0hy0 Maximum temperature: 180 ° C The temperature is adjustable Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Width: 1250 mm Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!