Milling machine

Deckel FP1

Year of construction: 1979, Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - Infinitely variable feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet Blej20xx - Original chip tray to be placed on the machine base - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition

Condition: good (used), Functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Bnri7nuxavf Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Year of construction: 1985, Condition: excellent (used), machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Bnrnrz3env Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, machine/vehicle number: 28670, x-travel:ca. 400 mm y-travel:150 mm z-travel:340 mm surface area:600 x 210 mm T-slots:4 T - slots - width:12 mm spindle speeds::20 - 2000 U/min turning speed range - vertical:60 - 1200 U/min Lp0qjcvh turning speed range - horizontal:95 - 1900 U/min speed steps work spindle:12 feed range:10 - 500 mm/min feed steps:10 spindle taper:MK 4 quill stroke vertical:60 mm total power requirement:1,7 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,9 x 1,05 x 1,55 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40

Year of construction: 1982, Condition: used, x-travel 290/300 mm y-travel 160 mm z-travel 330/340 mm engine output 1,5/1,9 kW weight of the machine ca. 0,7 t Optical condition: very good Mechanic: very good The machine can be viewed under current. Heidenhain digital readout, axes: 3 Aktiv vertical milling head Sk 40 Sk 40 S 20x2 operating instruction operating key ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green "Compliance with the Machinery Directive" on request at extra cost !! (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acceptance according to DGUV - V 3 with protocol Accesories: * new bellows in X / Y / Z * 3-axis Heidenhain active digital display TNC 113 * Horizontal milling device including counter bearing * Angle table adjustable * Chip tray Bax8u93vrlu * Coolant facility * Articulated cold light luminous * SK 40S 20x2 * 34 collets * 4 machine shoes * Operating/instruction manual, spare parts list, wiring diagrams, operating keys The machine is workshop tested and comes with an electrical test report delivered! Further conversions for occupational safety possible on request!

Condition: excellent (used), Deckel FP 1 tool milling machine with many accessories 2-axis feed. Qsoms0tgrf Guides in very good condition, as well as the gearbox. Operating instructions.

Year of construction: 1968, Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 52185/08 Year of construction 1968 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 250 mm spindle reception SK 40 - S20 x 2 Bc9wdwref7 spindle speed 40-2000 rpm. 16 steps motor power 1,0 and 1,4 kW pole changeable Mains connection 380 Volt, 50 Hz - Feed in X- and Z-axis - Two motor speeds and 8 gear steps - Pinol shift on vertical milling head 60 mm - Fixed angular table - Coolant device in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm weight approx. 1000 kg very good condition

Year of construction: 1995, Condition: good (used), Universal tool milling machine cover FP 1 several machines see pictures Clncmqhdug Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Technical data: x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Dimensions/weight: 1235x1160x1800 / approx. 800kg

Year of construction: 1985, Condition: excellent (used), machine/vehicle number: 2102-2783, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2783. Year of contruction 1985 Specifications: E2ma0uq - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - Automatic central greasing - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways disambled, checked and are in excellent condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Year of construction: 1960, Condition: used, machine/vehicle number: 56907/08, x-travel:300 mm y-travel:150 mm z-travel:340 mm surface area:600 x 210 mm T-slots:5 T - slots - width:12 mm turning speed range - vertical:250 - 2000 U/min turning speed range - horizontal:40 - 315 U/min speed steps work spindle:8 Gxipyrqf8 feed range:10 - 500 mm/min feed steps:8 quill stroke:60 mm spindle taper:SK 40 total power requirement:1,7 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,90 x 1,10 x 1,55 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table ( Tilt and Turn ) - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40 - Seperate power cabin,

Condition: used, x-travel 300 mm Bmca7imyvce y-travel 150 mm z-travel 340 mm turning speeds 60 - 1900 / 9.5 - 1.200 U/min table: 600 x 250 mm spindle taper MK 4 // 20 x 2 feed range ~ 10 - 500 mm/min total power requirement 1.5 kW weight of the machine ca. 750 kg range L-W-H 1250 x 1200 x 1800 mm from a training workshop (BOSCH) maintained condition (!!) Furnishing: - electro-motoric universal milling machine - conventional - easy to use - electro-motor feeds: X and Z axis - manual feed via handwheel: Y axis - robust work table with 5x T-slots - rotatable vertical milling head (SN 5287) - vertical & horizontal work spindle (without counterholder) - separate control cabinet - Coolant system with chip collection tray - Machine light (retrofitted) - EMERGENCY stop button (retrofitted) - User manual (PDF) * Machine link: ?machineno=1008-9131207

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout Heidenhain from training workshop Technical data: >> Year of construction 1975 Machine-No.55874/08 >> Rigid angular table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital readout from Heidenhain >> Coolant device Pul23njlsf About the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. The gibs have been adjusted and the bellows are new. The oil has been changed. The FP1 comes from a large company and was only used for training purposes. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Year of construction: 1960, Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base Rf73r - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Year of construction: 1968, Condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm Dlwgut T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Year of construction: 1976, Condition: excellent (used), Beautiful Deckel FP1 tool milling machine from the training department, 3-axis Heidenhain digital readout, machine was overhauled by DMG years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Bme9f7di8ol

Condition: used, machine/vehicle number: 52326/08, x-travel:250 mm y-travel:150 mm z-travel:305 mm table surface area:600 x 210 mm spindle speeds:40 - 2000 U/min spindle turning speed range:16 spindle taper:SK 40 feed:10 - 500 mm/min feed steps:16 vertical head swivelling:+/- 90 Grad total power requirement:1,0 / 1,4 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:1,0 x 1,25 x 0,85 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table ( Tilt and Turn ) Lrnfq9cr - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40 - Seperate power cabin

Condition: excellent (used), Functionality: fully functional, F747 Universal milling machine Deckel FP1 with 3-axis digital readout K&C NEW Special paint light gray !!! Technical data: Doey7p >> Machine no. 52828 Year of construction approx. 1975 >> Rigid angle table (new planed) >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> S20x2 tightening system >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. The gibs have been adjusted. An oil change was carried out. Mechanically and electrically tested. The digital display from K&C makes work easier and even more precise. You also have a 1-year warranty on the new digital display. Take the opportunity to inspect and try out the lids on site under power.

Year of construction: 1965, Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 34338 Year of construction approx. 1965 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Cdt3ywgck3 Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in the machine base - Pinol shift at the vertical milling head 60 mm - swivel-rotary and inclinable angular table - adjacent switch cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition

Condition: excellent (used), Functionality: fully functional, F740 Universal milling machine Deckel FP1 with 3-axis digital readout K&C stepless feed in light gray super condition Technical data: >> Year of manufacture 1978 Machine no. 2101-0119 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed stepless 2 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital indicator K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : Pug3ug9omx We are offering a Deckel FP1 universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The bellows are all new. On this newer FP1 model, the feed is infinitely variable in two axes and the machine also has a rapid traverse. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power.

Year of construction: 1979, Condition: used, Univ. tool milling machine DECKEL type FP 1 Bmwi7idafh9 Machine no. No. 2101 - 0778 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-changing Mains connection 380 Volt, 50 Hz - Infinitely variable feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet - Original chip tray to be placed on the machine base - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg good condition

Condition: excellent (used), Functionality: fully functional, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Bno7mocbec Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Year of construction: 1967, Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine. No. 51265/08 Year of construction approx. 1967 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 2100 mm spindle mounting SK 40 - S20 x 2 spindle speed 40-2000 rpm. 16 steps motor power 1,0 and 1,6 kW pole changeable Mains connection 380 Volt, 50 Hz - feed in X- and Z-axis - spindle speed via 2 motor speeds and 8 gear steps - Pinol shift at vertical milling head 60 mm - Fixed angular table - Adjacent control cabinet 2ssvba Space requirement L x W x H 1100 x 1100 x 1600 mm weight 650 kg good condition

Year of construction: 1992, Condition: excellent (used), Functionality: fully functional, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes Bmbwuweo9t3 >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Year of construction: 1960, Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 33064 Year of construction approx. 1960 travel X: 300 mm Y: 150 mm Z: 330 mm table size 600 x 210 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,1 and 1,4 kW Mains connection 380 Volt, 50 Hz - feed in X- and Y-axis Bc9vftkl8y - pinol shift at vertical milling head - fixed angular table - coolant unit with mechanical pump in the machine base - adjacent switch cabinet with cable plug connection space requirement L x W x H 1100 x 900 x 1600 mm weight approx. 900 kg good condition machine new painted in original grey color

Year of construction: 1992, Condition: excellent (used), Universal milling machine Deckel FP1 with 3 - axis - active digital display TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> Year of manufacture 1992 Machine No. 2102-6195 >> rigid angular table ( new planed ) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100mm on spindle block >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> weight approx. 800 Kg Accessories and equipment: >> 3 axes digital display Heidenhain TNC113 >> Coolant device >> Operating manual, spare parts plan Bbtw9vgygwb To the machine : Offered is universal milling machine Deckel FP1 year of manufacture 1992 in a very good condition. The machine has very little crank play and all spindles can be moved easily. Even at maximum speeds, the milling machine runs very smoothly. On this newer FP1 model the feed in three axes is infinitely variable, furthermore the machine has rapid traverse in these axes. A big advantage is the active 3 axes digital display. With this Heidenhain route control you can enter dimensions that the machine automatically approaches. The FP1 was in a training company, where it was used only occasionally. An oil change has been done. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more accurate. Take the opportunity to inspect and try this machine on site under power.