Adyton - Oslo Hi-Fi Center
Adyton - Oslo Hi-Fi Center
Adyton - Oslo Hi-Fi Center
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Adyton</strong>
<strong>Adyton</strong> are proud to introduce<br />
their revolutionary new<br />
X3 and X2 loudspeakers to<br />
the world. Manufactured in<br />
Denmark and designed in Britain by<br />
Russell P. Kauffmann, the Eben X3<br />
and X2 project bring together the<br />
combined knowledge of two great<br />
<strong>Hi</strong> <strong>Fi</strong> manufacturing traditions.<br />
The X3 and X2 loudspeaker uses the<br />
most mechanically stable Danish<br />
cabinet construction in the world.<br />
The cabinet is divided into five<br />
separate chambers.<br />
The Eben X3 employs 4 specially<br />
designed 5.5 inch high speed, low<br />
mass woofers with a very wide<br />
dynamic range.<br />
Eben X2 employs 4.5 inch woofers.<br />
In order to minimize distortion and<br />
phase shifts, and increase the dynamic<br />
range the woofers do not use an<br />
electronic cross over. Instead a<br />
proprietary tuned chamber design is<br />
used to tune the woofers.<br />
The design concept uses in the X3<br />
and X2 eliminates standing waves and<br />
uses a highly modified ported reflex<br />
design. The port is machined from a<br />
high grade aluminium which controls<br />
resonance's.<br />
The X3 and X2 uses a specially<br />
developed low compression low<br />
distortion tweeter sealed in its own<br />
chamber The tweeter uses a proprietary<br />
2nd order cross-over featuring Jensen<br />
capacitors, coils and non inductive<br />
resistors.
Each X3 and X2 is internally wired with<br />
Nordost monofilament cables.<br />
The bottom plinth of the X3 loudspeaker<br />
is machined from solid piece of high<br />
grade aluminium and is double<br />
decoupled from the floor using seven<br />
Nordost Pulsar Points.<br />
The Eben X3 and X2 uses a dual set of<br />
gold plated five way binding posts which<br />
allow the speakers to be BI-wired or<br />
BI-amped.<br />
Specifications.<br />
X3 :<br />
Power handling: 200 Watts RMS.<br />
Impedance: Minimum 4 Ohms<br />
Frequency response: 28-22.000 Hz<br />
Sensitivity: 91 dB<br />
Weight: 35 kg.<br />
X2 :<br />
Power handling: 100 Watts RMS.<br />
Impedance: Minimum 4 Ohms<br />
Frequency response: 35-22.000 Hz<br />
Sensitivity: 90 dB<br />
Weight: 22 kg.<br />
Aavik Furniture·<br />
Hjulmagervej 21 . OK 9000 Aalborg<br />
Phone +45 9816 6027<br />
Fax. +45 9816 6051<br />
E-mail: aavik@aavik.dk