Laser Sensor LMC-J-0030-X

Laser distance detector mit 3 relay outputs

For collision avoidance and warning

Laser sensor LMC-J-0030-x is an opto-electronic distance detection module for industrial applications. The device uses a contactless measuring technique based on comparative phase measurement and amplitude modulation. The sensor world with a cw-Laser diode. The transmitting power is ≤ 1 mW and therefore achieve Laser class 2. Laser divergence  conducts 0.6 mrd and allows a measurements in pinpoint accuracy.

The sensor is easy to programming und therefore offers three free selectable break points over the complete measuring range. The necessary „teach-in“ buttons are situated on the back panel of the sensors hidden under screw-fxed cover plate. Parametrizable are three relay switching outputs. An additional fourth relay in the sensor switches off during measurement, in case of a hardware failure, fall of potential or a measuring error.

There are three LEDs placed on the back panel of the sensor (3x yellow, 1x red), visualizing the three single conditions relating to the current switching value. The fourth red LED is for visualizing errors.

Features of the LMC-J-0030-X:

• Non-contact distance detecting with the help of
  3 switching outputs, f.e. für collision avoidance
• Visible laser light with a wave length of λ=650 nm enables easy adjustment
• Positioning within millimeter accuracy possible
• Measuring range up to 30 m on diffusely reflecting surfaces, up to 150 m on reflectors
• Relais 250 VAC/5 A (break contact or closing contact)
• Additional relay for showing failures
• Measuring on surfaces up to  1,000 °C

Technical data of LMC-J-0030-X:

Measuring data:

• Detection range defined from 0.2 up to 30 m on natural surfaces
• Temperature range in the field: -10 °C up to + 60 °C
• Down to -30 °C with optional heating
• Storage temperature -20 °C up to +70 °C
• Maximum object temperature up to 1,000 °C
• Switching accuracy < ± 0.5 mm
• MTTF 50,000 hours
• Reaction times min. 100 ms
• Power supply 18 - 36 VDC / 1 Watt
• Visible laser light < 1 mW
• Laser class 2 (DIN EN 60825-1)
• Compact design:
  • Dimensions with holder (L x W x H): 260 x 87 x 164 mm
  • Weight: 2.5 kg
  • Housing according to IP66 made of Aluminium in blue/black

Accessories:

Holder, tube, air purge, galvanic isolation, cable, more customized solutions on request 

Laser Sensor LMC-J-0510-X

The laser distance measuring system LMC-J-510-X is robustly engineered especially for industrial applications. It works at distances up to 500 m within millimeter accuracy. In accordance to the reflectivity up to 100 m on  diffusely reflecting surfaces are possible. Measuring values are provided continuously via the integrated interfaces RS 232 or RS 422 or 485 with Analog output 4… 20 mA. Optional there are more interfaces realizable, such as ProfiBus, Ethernet TCP/IP and SSI. Based on the measuring rate of 100 Hz and the small beam diffusion, pinpoint accurate measurements during different production processes are can be realized.

Features of the laser distance measuring device LMC-J-0510-X:

• Non contact distance measurement up to 100 Hz
• Application temperature - 40 °C ... + 60 °C (with integrated heating)
• Measuring times 10 … 1,000 ms
• Visible measuring beam

Technical data of the laser distance measuring device LMC-J-0510-X:

• Laser:
  • Laser class 2 (EN 60825-1:2007)
  • Wave length λ= 635 nm
  • Divergence < 0.35 mrad

• Housing:
  • Connection via industrial jack
  • Housing made of Aluminium
  • Protection class of housing IP 67
  • EMV EN 61326-1    

• Compact design:
  • Dimensions (L x W x H): 120 x 76.5 x 40 mm
  • Weight: 0.7 kg

• Power supply 10 - 30 VDC
• Power consumption < 5 W (with heating 15 W at 24 V)

Laser Sensor LMC-J-0060-X

The laser sensor LMC-J-0060-X-X has been especially developed for industrial applications. Therefore it is integrated in a robust housing. Basis of the measuring concept builds the combination of phase-shift measurement and electro-optical based TOF. So a measuring rate on diffusely reflecting surfaces up to 100 Hz realizable within millimeter accuracy an up to 0.2 mm repeatable. This small laser divergence enables exact measurements with an absolute accuracy of 1 mm over distances up to 500 m.

The parametrizing of the sensors, such as the defining of the measuring rate, the average determination, the  measuring field, the  auto-start function, the baud rate and so on, occurs via interfaces. At standard, the user already can use 3 serial interfaces (RS 232/422 and 485) and one Analog output 4 … 20 mA and 3 switching outputs.

For safe and easy installation and adjustment the sensor is equipped with a spring cushioned three point bracket in standard. Moreover there is a solution with three point bracket for vertical installation.

Features of the laser distance measuring device LMC-J-0060-X-X:

• Compact design:
  • Dimensions (L x W x H): 235 x 90 x 110 mm
  • Weight 3.2 kg, incl. holding device
• Housing Aluminium,
  • EMV referred to EN 61326-1
• Laser class 2 (EN 60825-1:2007) wave length λ= 635 nm, divergence < 0.35 mrad
• dust and splash water safe referred to IP 66
• Working temperature -20 °C ... +60 °C
• With optional heating -40 °C … +60 °C
• Low power consumption, < 5 W, with heating 15 W at 24 V
• Power supply 10 - 30 VDC 

Options for laser distance measuring device LMC-J-0060-X-X:

• Exchange window
• 90° beam deflection 
• Double long front tube for better protection against dust and spray material 
• Water cooling for ambient temperatures up to +100 °C
• Protecting class IP 67
• Application with heating shield
• Air purge
• Heating for temperatures down to -40 °C
• Customized interfaces  (f.e. Ethernet TCP/IP, WLAN ... ), outputs and housings

Laser Sensor LMC-X-0062-X

Precise – Robust – Reflector less – Fast: 

The LMC-X-0062X is an opto-electronic distance measuring module for industrial applications. The module operates on basis of pulse back-mixing method. The Laser has a divergence of 0.35 mrad for measurement with pinpoint accuracy. The max. measuring output is 100Hz. The measured result is available on the RS 232 or RS 422 data interface. Available are 3x digital switching output, 1x analogue 4...20mA output and 1x Trigger In/Out. Optional are available Profibus, Ethernet TCP/IP, ProfiNet and CAN-open. The sensor alignment can be easily achieved with the help of the red pilot laser. The measuring range is between 0,2 to 100 m on any natural surface, dependent of surface remission.

Features of the laser distance measuring device LMC-X-0062-X:

• laser class 2 for eye safe operation 
• Non-reflector measurement 
• Millimetre accuracy measurement on any surface
• Easy installation and commissioning 
• Allows field bus integration 
• Also available in explosion-proofed version 

Safety class: 

•  II 2G Ex db op is IIC T6 Gb

•  II 2D Ex tb op is IIIC T80° Db 

•  Licence: EPS 14 ATEX 1 696 X 

•  -20°C bis +40°C 

   

Technical Data for laser distance measuring device LMC-X-0062-X:

• Compact design:
  • Dimensions (L x W x H): 340 x 144 x 144 mm
  • Weight 6.0 kg
• Housing Aluminium
  • EMC referred to EN 61326-1
• Laser class 2 (EN 60825-1:2007) wave length λ= 650 nm, divergence < 0.35 mrad
• Measuring time: 10 ...1000 ms
• dust and splash water safe referred to IP 66
• Temperature range: -20 °C ... +40 °C
• Low power consumption, < 5 W, with heating 15 W at 24 V
• Power supply 10 - 30 VDC