inpa srs airbag light

[Cescill]

Hey guys great forum! This is my first post! I couldnt find anything similar on line so, could someone please translate / explain to me these errors?

These are from inpa. The car is a e36 m42 1.6 litre.
My name is Vasilis, im Greek and is nice to be here

[johnf]

The first reports a one-off wiring failure in left-side NRSA(?) circuit; the second reports the driver's side-airbag firing (squib) circuit has twice, resistively or directly, shorted to 12V.

What year and month was your car built? I suspect you have a later M43 car.

[Cescill]

Yes it the m43! My mistake. The year is 98

[Eric93se]

Often these errors are due to corroded connectors. So when you f ind the connectors, remove the negative on the battery first, then wait 10min, then disconnect and clean the airbag connectors. You can use an old tooth brush and a cleaner called Deoxit 5%.

[MParallel]

MRSA is the crash impact sensor.

SA will stand for "Seite Auswirkung" aka Side Impact.

[Cescill]

Hey guys thanks for your replies! So i couldnt find deoxit here in greece so i used a contact cleaner. It fixed the problem for a couple of days (no srs light!) but then i accidentally slammed the door and the airbag light went on again. I didnt have the time to reopen the door but isnt it strange? I think something must have disrupted the plug. Anyway when ill find some time ill check it again and report back.

Off topic/
while i was checking the fuse box i noticed the previous owner had put wrong fuses in some cases. One in particular instead of 5amps he put a 30amp fuse! I replaced about 10 fuses... Geez some people...
\ off topic