Keep Talking and Nobody Explodes Bomb

I recently bought a co-op video game called keep talking ang nobody explodes. In this game you defuse a bomb with random modules while the second player tells you how. I made a customizable bomb inspired by the game and 5 of the modules. This bomb is also a box to store the different parts of the bomb!

-I didn't make all 12 modules

because I haven't played the game that much.

• lots of cardboard
• hot glue
• acrylic paint (grey-white-black-yellow)
• brushes
• a glass of water (for the acrylics)
• pencil
• ruler
• scissors
• utility knife (paper cutter)
• 16 screws -optionally
• Velcro tape
• 4 little magnets
• Double-Sided Tape

First of all you need to draw and cut some cardboard

1. 2 pieces 17x11,5 cm
2. 4 pieces 17x3 cm
3. 4 pieces 11,5x3 cm
4. 2 pieces 17x1,5 cm
5. 2 pieces 11,5x1,5 cm
6. 8 pieces 4x2

-sorry I lost some of my photos

on the process of uploading to my drive

Now you can glue the 17x11,5 and the 17x3, 11,5x3 pieces of cardboard to make the two half's of the bomb, then glue one of the 17x1,5 piece on the first half and the other three 17x1,5-11,5 in the second half

Cut some thin cardboard strips and add them to the bomb like the image on the top of the 2 halves.

It's time to give some color to the bomb. Paint the top of the two halves grey and the sides light grey. After the acrylics are dry paint the inside of the bomb black and the little 4x2 pieces yellow.

Print 12 empty module icons (I'll link the printable below) add Double-Sided Tape on the back of the printable and cut the module icons.

printable: https://drive.google.com/file/d/1EsUGH73P7-tCJOXJr2nNbfn2OcBZCgUx/view?usp=sharing

Place the ''empty'' modules on the bomb.

Take the 4x2 cardboard pieces cut the 6 of them in half and fold the other 2 like the picture.

After that glue the 4 magnets in 4 of the halves.

Glue 4 of the halves to the small sides of the bomb and the 2 folded and 2 with magnets. Then add the screws for detail.

Now you have a bomb box! Cut the Velcro tape in small squares and glue them to the bomb like the picture.

The bomb base is done! Time to add the modules.

• Cardboard
• plastic thin cables (red-green-white-yellow)
• ruler
• pencil
• scissors
• Velcro tape
• brush
• grey acrylic paint
• hot glue
• wooden sticks
• black marker (you can use acrylic but markers are blacker)
• Also you need little light bulbs for the modules (you can take the bulbs from old Christmas tree light strip)

Draw and cut a 5x5 and a 4x4 cardboard piece.

Also cut the sticks in 12 pieces.

Paint the 5x5 square and the 12 stick pieces black and the 4x4 cardboard grey.

Glue the 4x4 square on top of the 5x5 piece and add the ''black'' sticks like the image.

After the glue is dry open a hole and glue the light bulb in place.

Cut the cables and glue them to the black stick parts.

Add some Velcro tape pieces in the back and the cable module should be done.

• cardboard
• ruler
• pencil
• diabetes
• brush
• acrylic paint (grey-white)
• black marker
• scissors
• hot glue
• Velcro tape
• little light bulb

Draw and cut the cardboard in

1. 5x5cm square
2. 4x4cm square
3. 1x3cm rectangle
4. 3 circles (diabetes open 1cm)
5. 2 circles (diabetes open 1,5cm)

Paint the 5x5cm square and the 1x3 rectangle black, the 2 big circles white and the 4x4cm square grey.

Glue the 4x4 square on the 5x5 and add the 1x3 rectangle in the right side of the module.

Stack the circles, first the 3 small ones an then the bigger on top.

Open a little hole and glue the light bulb in place.

Write ''HOLD'' on the button, cut some small pieces of Velcro tape and glue them in the back.

The button module is ready!

• cardboard
• ruler
• pencil
• brush
• acrylic paint (grey)
• black marker
• scissors
• hot glue
• Velcro tape
• little light bulb

Also you need a stick of glue

Draw and cut the cardboard in

1. a 5x5cm square
2. a 4x4cm square
3. and 4 1,5x1,5cm squares

Draw the 5x5 square black and the 4x4 square grey.

Glue the cardboard pieces like the image shows.

Print the symbols cut them and glue them in the 4 little squares.

printable: https://drive.google.com/file/d/1l0rwOEkz3ccbM66AMPVamV_HGLy8A7U3/view?usp=sharing

Take the light bulb and glue it in the right corner of the module.

Glue some of the Velcro tape in the back.

The module is done.

• cardboard
• ruler
• pencil
• scissors
• brush
• acrylic paint (grey-blue-yellow-red-green)
• black marker
• Velcro tape
• hot glue
• light bulb

Take the cardboard and cut a 5x5, a 4x4 and 4 1x1 squares.

Paint the 5x5 black, the 4x4 grey and the 4 small squares 1 red, 1 green, 1 blue and 1 yellow.

Glue all the pieces like the image and add the light bulb on top right.

-the image is missing a light bulb

for some reason ''/

Cut the Velcro tape in 4 pieces glue them on the back and add the module to the bomb!

• cardboard
• ruler
• pencil
• scissors
• brush
• grey acrylic paint
• white marker
• back marker
• red marker that writes in black paper
• green marker that writes in black paper
• hot glue
• Velcro tape
• light bulb

Cut the cardboard in a 5x5cm box a 4x4cm box and 4 little tringles.

Paint the 5x5cm box grey, the 4x4cm box black and the tringles also grey.

Now glue the cardboard together as shown in the image.

Create an outline for the tringle ''buttons'' with the white marker.

Draw 36 small dots, then add 2 green circles, 1 white box and a red tringle.

Add the light bulb on the top right of the module with some glue.

Cut the Velcro tape in 4 pieces and glue it on the back of the module.

Now you have a mini map on the bomb.

• cardboard
• ruler
• pencil
• scissors
• brush
• grey acrylic paint
• black marker
• red marker that can write in black paper
• hot glue
• Velcro tape

Draw and cut a 5x5cm, 2 2x5cm, 2 2x3cm and 2 1x2cm pieces from cardboard.

Glue the cardboard as shown in the image to make 2 boxes a big one on the bottom and a smaller on top.

Cut more cardboard this time a 3x4cm piece and a 2,5x1,5cm piece.

Take the cardboard pieces and glue them to the clock as shown in the image.

Paint the clock with black in the corners and display and grey on the frame of the clock.

Write the time you want to be left and the mistake symbol with the red marker.

Glue the Velcro tape on the back and add the clock to the bomb!

The bomb is done. You can customize it, remove the modules and add some details like a serial number or batteries!